| Age | Commit message (Collapse) | Author |
|---|
|
Notes:
Merged: https://github.com/ruby/ruby/pull/5435
|
|
This adds support for passing keyword arguments to cfuncs. This is done
by calling a helper method to create the hash from the top N values on
the stack (determined by the callinfo) and then moving that value onto
the stack.
Notes:
Merged: https://github.com/ruby/ruby/pull/5397
|
|
This adds support for cfuncs which take variable arguments using a Ruby
array. This is specified with the method entry's argc == -2.
Notes:
Merged: https://github.com/ruby/ruby/pull/5396
|
|
Saving SP later allows us to avoid storing SP in an intermediate
register and allows using the ctx_stack_opnd helpers.
Notes:
Merged: https://github.com/ruby/ruby/pull/5396
|
|
Routines that are called from YJIT's output code can call methods, and
calling methods mean they can capture and change the environment of the
calling frame.
Discard type info whenever we perform routine calls. This is more
conservative than strictly necessary as some routines need to perform GC
allocation but can never call methods and so should never be able to
change local variables. However, manually analyzing C functions for
whether they have code paths that call methods is error prone and can go
out of date as changes land in the codebase.
Closes: shopify/yjit#300
Notes:
Merged: https://github.com/ruby/ruby/pull/5416
|
|
|
|
Correct method name, fix copypasta, and add an ASCII illustration.
[ci skip]
|
|
Previously when we were calling a method with an optional argument and
multiple keywords arguments which weren't in the order the receiver
expected we would use the wrong SP index to rearrange them.
Fixes Bug #18453
Notes:
Merged: https://github.com/ruby/ruby/pull/5379
|
|
|
|
`intern` showed up in the top 20 most frequent exit ops (granted with a
fairly small percentage) in a benchmark run by @jhawthorn on
github/github.
This implementation is similar to gen_anytostring, but with 1
stack pop instead of 2.
Co-authored-by: John Hawthorn <jhawthorn@github.com>
Notes:
Merged: https://github.com/ruby/ruby/pull/5291
|
|
Inline and remove iseq_supported_args_p(iseq) to remove a potentially
dangerous double check on `iseq->body->param.flags.has_block` and
`iseq->body->local_iseq == iseq`. Double checking should be fine at the
moment as there should be no case where we perform a call to an iseq
that takes a block but `local_iseq != iseq`, but such situation might
be possible when we add support for calling into BMETHODs, for example.
Inlining also has the benefit of mirroring the interpreter's code for
blockarg setup in `setup_parameters_complex()`, making checking for
parity easier.
Extract `vm_ci_flag(ci) & VM_CALL_KWARG` into a const local for brevity.
Constify `doing_kw_call` because we can.
Notes:
Merged: https://github.com/ruby/ruby/pull/5285
|
|
Previously, YJIT would not check that all the required keywords were
specified in the case that there were optional arguments specified. In
this case YJIT would incorrectly call the method with invalid arguments.
Notes:
Merged: https://github.com/ruby/ruby/pull/5285
|
|
Previously we mirrored the fast paths the interpreter had for having
only one of kwargs or optional args. This commit aims to combine the
cases and reduce complexity.
Though this allows calling iseqs which have have both optional and
keyword arguments, it requires that all optional arguments are specified
when there are keyword arguments, since unspecified optional arguments
appear before the kwargs. Support for this can be added a in a future
PR.
Notes:
Merged: https://github.com/ruby/ruby/pull/5285
|
|
Previously, YJIT incorrectly discarded the upper 32 bits of the object
pointer when writing out VALUEs to setup default keyword arguments.
In addition to incorrectly truncating, the output pointers were not
properly tracked for handling GC compaction moving the referenced
objects.
YJIT previously attempted to encode a mov instruction with a memory
destination and a 64 bit immediate when there is no such encoding
possible in the ISA. Add an assert to mitigate not being able to
catch this at build time.
Notes:
Merged: https://github.com/ruby/ruby/pull/5274
Merged-By: XrXr
|
|
It's superseded by functionality added to jit_guard_known_klass().
In weird situations such as the ones in the included test,
guard_self_is_heap() triggered assertions.
Co-authored-by: Jemma Issroff <jemmaissroff@gmail.com>
Notes:
Merged: https://github.com/ruby/ruby/pull/5225
|
|
Verify that the iseq idx pair for the block is valid in
invalidate_block_version(). While we are at it, bound loop
iterating over instructions to `iseq_body->iseq_size`.
Notes:
Merged: https://github.com/ruby/ruby/pull/5222
|
|
Previously, YJIT assumed that basic blocks never consume more than
1 KiB of memory. This assumption does not hold for long Ruby methods
such as the one in the following:
```ruby
eval(<<RUBY)
def set_local_a_lot
#{'_=0;'*0x40000}
end
RUBY
set_local_a_lot
```
For low `--yjit-exec-mem-size` values, one basic block could exhaust the
entire buffer.
Introduce a new field `codeblock_t::dropped_bytes` that the assembler
sets whenever it runs out of space. Check this field in
gen_single_block() to respond to out of memory situations and other
error conditions. This design avoids making the control flow graph of
existing code generation functions more complex.
Use POSIX shell in misc/test_yjit_asm.sh since bash is expanding
`0%/*/*` differently.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Notes:
Merged: https://github.com/ruby/ruby/pull/5209
|
|
On Rails we're seeing a lot of exits for ivars in the Active Record
tests. In trying to track them down it was hard to find what code is
exiting.
This change adds a counted exit for when an object is "megamorphic". In
these cases there are too many specializations in the Ruby code so YJIT
exits.
Co-authored-by: Aaron Patterson tenderlove@ruby-lang.org
Notes:
Merged: https://github.com/ruby/ruby/pull/5197
|
|
Notes:
Merged: https://github.com/ruby/ruby/pull/5203
Merged-By: XrXr
|
|
Some platforms don't want memory to be marked as writeable and
executable at the same time. When we write to the code block, we
calculate the OS page that the buffer position maps to. Then we call
`mprotect` to allow writes on that particular page. As an optimization,
we cache the "last written" aligned page which allows us to amortize the
cost of the `mprotect` call. In other words, sequential writes to the
same page will only call `mprotect` on the page once.
When we're done writing, we call `mprotect` on the entire JIT buffer.
This means we don't need to keep track of which pages were marked as
writeable, we let the OS take care of that.
Co-authored-by: John Hawthorn <john@hawthorn.email>
Notes:
Merged: https://github.com/ruby/ruby/pull/5032
|
|
Previously, YJIT crashes with rb_bug() when asked to compile new methods
while out of executable memory.
To handle this situation gracefully, this change keeps track of all the
blocks compiled each invocation in case YJIT runs out of memory in the
middle of a compliation sequence. The list is used to free all blocks in
case compilation fails.
yjit_gen_block() is renamed to gen_single_block() to make it distinct from
gen_block_version(). Call to limit_block_version() and block_t
allocation is moved into the function to help tidy error checking in the
outer loop.
limit_block_version() now returns by value. I feel that an out parameter
with conditional mutation is unnecessarily hard to read in code that
does not need to go for last drop performance. There is a good chance
that the optimizer is able to output identical code anyways.
Notes:
Merged: https://github.com/ruby/ruby/pull/5191
|
|
Previously, YJIT assumed that it's always possible to generate a new
basic block when servicing a stub in branch_stub_hit(). When YJIT is out
of executable memory, for example, this assumption doesn't hold up.
Add handling to branch_stub_hit() for servicing stubs without consuming
more executable memory by adding a code path that exits to the
interpreter at the location the branch stub represents. The new code
path reconstructs interpreter state in branch_stub_hit() and then exits
with a new snippet called `code_for_exit_from_stub` that returns
`Qundef` from the YJIT native stack frame.
As this change adds another place where we regenerate code from
`branch_t`, extract the logic for it into a new function and call it
regenerate_branch(). While we are at it, make the branch shrinking code
path in branch_stub_hit() more explicit.
This new functionality is hard to test without full support for out of
memory conditions. To verify this change, I ran
`RUBY_YJIT_ENABLE=1 make check -j12` with the following patch to stress
test the new code path:
```diff
diff --git a/yjit_core.c b/yjit_core.c
index 4ab63d9806..5788b8c5ed 100644
--- a/yjit_core.c
+++ b/yjit_core.c
@@ -878,8 +878,12 @@ branch_stub_hit(branch_t *branch, const uint32_t target_idx, rb_execution_contex
cb_set_write_ptr(cb, branch->end_addr);
}
+if (rand() < RAND_MAX/2) {
// Compile the new block version
p_block = gen_block_version(target, target_ctx, ec);
+}else{
+ p_block = NULL;
+}
if (!p_block && branch_modified) {
// We couldn't generate a new block for the branch, but we modified the branch.
```
We can enable the new test along with other OOM tests once full support
lands.
Other small changes:
* yjit_utils.c (print_str): Update to work with new native frame shape.
Follow up for 8fa0ee4d404.
* yjit_iface.c (rb_yjit_init): Run yjit_init_core() after
yjit_init_codegen() so `cb` and `ocb` are available.
Notes:
Merged: https://github.com/ruby/ruby/pull/5180
Merged-By: XrXr
|
|
* YJIT: Introduce jit_putobject
This extracts the logic previously inside gen_putobject to a more
reusable helper method jit_putobject.
The motivation for this is that it both simplifies the implementation of
other instructions, and other instructions can reuse the optimized
behaviour for 32-bit special constants (most importantly
opt_getinlinecache).
This commit also expands the optimization to use a mov directly to
memory when we encounter a 32-bit immediate constant. Previously it
covered fixnums and Qtrue/Qfalse, now it will cover any SPECIAL_CONST_P
value which can be represented as a 32-bit immediate. Notably, this
includes static symbols, and Qnil.
* Style touchups and a comment
* delete empty line
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
Notes:
Merged-By: jhawthorn <john@hawthorn.email>
|
|
* YJIT: Implement optimized_method_struct_aref
* YJIT: Implement struct_aref without method call
Struct member reads can be compiled directly into a memory read (with
either one or two levels of indirection).
* YJIT: Implement optimized struct aset
* YJIT: Update tests for struct access
* YJIT: Add counters for remaining optimized methods
* Check for INT32_MAX overflow
It only takes a struct with 0x7fffffff/8+1 members. Also add some
cheap compile time checks.
* Add tests for non-embedded struct aref/aset
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
Notes:
Merged-By: jhawthorn <john@hawthorn.email>
|
|
Implements setclassvariable in yjit. Note that this version is not
faster than the standard version because we aren't handling the inline
cache in assembly. This is still important to implement because it will
prevent yjit from exiting in methods that call both a cvar setter and
other code that yjit can compile.
Co-authored-by: Aaron Patterson tenderlove@ruby-lang.org
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
This commit adds an entry_exit field to block_t for use in
invalidate_block_version(). By patching the start of the block while
invalidating it, invalidate_block_version() can function correctly
while there is no executable memory left for new branch stubs.
This change additionally fixes correctness for situations where we
cannot patch incoming jumps to the invalidated block. In situations
such as Shopify/yjit#226, the address to the start of the block
is saved and used later, possibly after the block is invalidated.
The assume_* family of function now generate block->entry_exit before
remembering blocks for invalidation.
RubyVM::YJIT.simulate_oom! is introduced for testing out of memory
conditions. The test for it is disabled for now because OOM triggers
other failure conditions not addressed by this commit.
Fixes Shopify/yjit#226
Notes:
Merged: https://github.com/ruby/ruby/pull/5145
|
|
This is the minimal correct objtostring implementation in YJIT.
For correctness, it is important that to_string not get called on strings or subclasses of string.
There is a new test for this behavior.
A follow up should implement an optimized version for other types as performed in `vm_objtostring`.
Co-authored-by: John Hawthorn <jhawthorn@github.com>
Co-authored-by: John Hawthorn <jhawthorn@github.com>
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
This provides a significant speedup for symbol, true, false,
nil, and 0-9, class/module, and a small speedup in most other cases.
Speedups (using included benchmarks):
:symbol :: 60%
0-9 :: 50%
Class/Module :: 50%
nil/true/false :: 20%
integer :: 10%
[] :: 10%
"" :: 3%
One reason this approach is faster is it reduces the number of
VM instructions for each interpolated value.
Initial idea, approach, and benchmarks from Eric Wong. I applied
the same approach against the master branch, updating it to handle
the significant internal changes since this was first proposed 4
years ago (such as CALL_INFO/CALL_CACHE -> CALL_DATA). I also
expanded it to optimize true/false/nil/0-9/class/module, and added
handling of missing methods, refined methods, and RUBY_DEBUG.
This renames the tostring insn to anytostring, and adds an
objtostring insn that implements the optimization. This requires
making a few functions non-static, and adding some non-static
functions.
This disables 4 YJIT tests. Those tests should be reenabled after
YJIT optimizes the new objtostring insn.
Implements [Feature #13715]
Co-authored-by: Eric Wong <e@80x24.org>
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
Co-authored-by: Yusuke Endoh <mame@ruby-lang.org>
Co-authored-by: Koichi Sasada <ko1@atdot.net>
Notes:
Merged: https://github.com/ruby/ruby/pull/5002
Merged-By: jeremyevans <code@jeremyevans.net>
|
|
* Refactor getclassvariable
We only need the cref when we have a cache miss so don't look it up until we
need it. This speeds up class variable reads in the interpreter but
also simplifies the jit code.
Benchmarks for master vs this branch (without yjit):
Before:
```
Warming up --------------------------------------
read a cvar 1.276M i/100ms
Calculating -------------------------------------
read a cvar 12.596M (± 1.7%) i/s - 63.781M in 5.064902s
```
After:
```
Warming up --------------------------------------
read a cvar 1.336M i/100ms
Calculating -------------------------------------
read a cvar 13.114M (± 3.6%) i/s - 65.488M in 5.000584s
```
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
* Clean up function signatures / remove dead code
rb_vm_getclassvariable signature has changed and we don't need
rb_vm_get_cref.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
* YJIT: Support iseq sends with mixed kwargs
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
* Add additional comments to iseq sends
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
Co-authored-by: John Crepezzi <john.crepezzi@gmail.com>
Co-authored-by: John Crepezzi <john.crepezzi@gmail.com>
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
* New code page allocation logic
* Fix leaked globals
* Fix leaked symbols, yjit asm tests
* Make COUNTED_EXIT take a jit argument, so we can eliminate global ocb
* Remove extra whitespace
* Change block start_pos/end_pos to be pointers instead of uint32_t
* Change branch end_pos and start_pos to end_addr, start_addr
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
* YJIT: Support kwargs sends with all defaults
Previously keyword argument methods were only compiled by YJIT when all
keywords were specified in the caller.
This adds support for calling methods with keyword arguments when no
keyword arguments are specified and all are filled with the defaults.
* Remove unused send_iseq_kwargs_none_passed
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
This caused Bus error on 32 bit Solaris
Notes:
Merged: https://github.com/ruby/ruby/pull/5049
|
|
* YJIT: Implement newhash with values
* YJIT: Add test of duphash
* Fix compilation on macos/clang
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
`duphash` showed up in the top-20 most frequent exit ops for @jhawthorn's benchmark that renders github.com/about
The implementation was almost exactly the same as `duparray`
Co-authored-by: John Hawthorn <john@hawthorn.email>
Co-authored-by: John Hawthorn <john@hawthorn.email>
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
2d98593bf54a37397c6e4886ccc7e3654c2eaf85 made it so that
attr_accessor methods fire C method tracing events.
Previously, we weren't checking for whether we are tracing before
compiling, leading to missed events.
Since global invalidation invalidates all code, and that attr_accessor
methods can never enable tracing while running, events are only dropped
when YJIT tries to compile when tracing is already enabled.
Factor out the code for checking tracing and check it before generating
code for attr_accessor methods.
This change fixes TestSetTraceFunc#test_tracepoint_attr when it's
ran in isolation.
Notes:
Merged-By: maximecb
|
|
On non RUBY_DEBUG builds, assert() compiles to nothing and the compiler
warns about uninitialized variables in those code paths. Replace
those asserts with rb_bug() to fix the warnings and do the assert in
all builds. Since yjit_asm_tests.c compiles outside of Ruby, it needed
a distinct version of rb_bug().
Also put YJIT_STATS check for function delcaration that is only defined
in YJIT_STATS builds.
|
|
Previously, we were shuffling keyword arguments before checking for
interrupts. In the case that we side exit in the interrupt check,
we left the interpreter with an already-shuffled argument list for
the call, resulting in a double shuffle, leaving the locals in the
wrong order for the callee.
Do keyword shuffling after all the possible side exits.
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
|
|
In an effort to simplify the logic YJIT generates for accessing instance
variable, YJIT ensures that a given name-to-index mapping exists at
compile time. In the case that the mapping doesn't exist, it was created
by using rb_ivar_set() with Qundef on the sample object we see at
compile time. This hack isn't fine if the sample object happens to be
frozen, in which case YJIT would raise a FrozenError unexpectedly.
To deal with this, make a new function that only reserves the mapping
but doesn't touch the object. This is rb_obj_ensure_iv_index_mapping().
This new function superceeds the functionality of rb_iv_index_tbl_lookup()
so it was removed.
Reported by and includes a test case from John Hawthorn <john@hawthorn.email>
Fixes: GH-282
|
|
|
|
Fixes: https://github.com/Shopify/yjit/issues/258
Co-authored-by: Aaron Patterson tenderlove@ruby-lang.org
|
|
|
|
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
|
|
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
|
|
|
|
|
|
|
|
|
