Age | Commit message (Collapse) | Author |
|
https://github.com/ruby/openssl/commit/911a31335f
|
|
https://github.com/ruby/openssl/commit/c99d24cee9
|
|
We use the following site for that now:
* https://tools.ietf.org/ or http
* https://datatracker.ietf.org or http
Today, IETF said the official site of RFC is www.rfc-editor.org.
FYI: https://authors.ietf.org/en/references-in-rfcxml
I replaced them to www.rfc-editor.org.
|
|
(https://github.com/ruby/openssl/pull/714)
* Add support for IO#timeout.
https://github.com/ruby/openssl/commit/3bbf5178a9
|
|
When compiled with OpenSSL <= 1.1.1, OpenSSL::SSL::SSLContext#setup
does not raise an exception on an error return from
SSL_CTX_load_verify_locations(), but instead only prints a verbose-mode
warning. This is not helpful since it very likely indicates an actual
error, such as the specified file not being readable.
Also, OpenSSL's error queue is not correctly cleared:
$ ruby -w -ropenssl -e'OpenSSL.debug=true; ctx=OpenSSL::SSL::SSLContext.new; ctx.ca_file="bad-path"; ctx.setup; pp OpenSSL.errors'
-e:1: warning: can't set verify locations
["error:02001002:system library:fopen:No such file or directory",
"error:2006D080:BIO routines:BIO_new_file:no such file",
"error:0B084002:x509 certificate routines:X509_load_cert_crl_file: system lib"]
The behavior is currently different when compiled with OpenSSL >= 3.0:
SSLError is raised if SSL_CTX_load_verify_file() or
SSL_CTX_load_verify_dir() fails.
This inconsistency was unintentionally introduced by commit https://github.com/ruby/openssl/commit/5375a55ffc35
("ssl: use SSL_CTX_load_verify_{file,dir}() if available", 2020-02-22).
However, raising SSLError seems more appropriate in this situation.
Let's adjust the OpenSSL <= 1.1.1 code so that it behaves the same way
as the OpenSSL >= 3.0 code currently does.
Fixes: https://github.com/ruby/openssl/issues/649
https://github.com/ruby/openssl/commit/7eb10f7b75
|
|
This reverts commit https://github.com/ruby/openssl/commit/fc4629d246f2.
The test case "test_connect_certificate_verify_failed_exception_message"
does want to check the reason behind a certificate verification failure
to be included in the exception message.
https://github.com/ruby/openssl/commit/c309745eb8
|
|
A tentative measures fo https://github.com/ruby/openssl/issues/606.
With OpenSSL 3.1.0, the error message at connection using "self-signed
certificate" seems to return `SSL_R_TLSV1_ALERT_UNKNOWN_CA` instead of
`SSL_R_CERTIFICATE_VERIFY_FAILED`.
https://github.com/ruby/openssl/commit/fc4629d246
|
|
https://github.com/ruby/openssl/commit/a3d230d4e0
|
|
As noted in commit https://github.com/ruby/openssl/commit/a2ed156cc9f1 ("test/test_ssl: do not run NPN tests
for LibreSSL >= 2.6.1", 2017-08-13), NPN is known not to work properly
on LibreSSL.
Disable NPN support on LibreSSL, whether OPENSSL_NO_NEXTPROTONEG is
defined or not.
NPN is less relevant today anyway. Let's also silence test suite when
it's not available.
https://github.com/ruby/openssl/commit/289f6e0e1f
|
|
- This callback is invoked when TLS key material is generated or
received, in order to allow applications to store this keying material
for debugging purposes.
- It is invoked with an `SSLSocket` and a string containing the key
material in the format used by NSS for its SSLKEYLOGFILE debugging
output.
- This commit adds the Ruby binding `keylog_cb` and the related tests
- It is only compatible with OpenSSL >= 1.1.1. Even if LibreSSL implements
`SSL_CTX_set_keylog_callback()` from v3.4.2, it does nothing (see
https://github.com/libressl-portable/openbsd/commit/648d39f0f035835d0653342d139883b9661e9cb6)
https://github.com/ruby/openssl/commit/3b63232cf1
|
|
Add OpenSSL::SSL::SSLSocket#export_keying_material to support RFC 5705
https://github.com/ruby/openssl/commit/65530b887e
|
|
It does not raise an error when setting an invalid value to SSLContext
ciphers on Ubuntu 18.04.
https://github.com/ruby/openssl/commit/8c96a69b0d
|
|
https://github.com/ruby/openssl/commit/862d92de93
|
|
LibreSSL 3.5 switched the cipher naming to match OpenSSL.
https://github.com/ruby/openssl/commit/bf198278bd
|
|
suites along with some unit tests (https://github.com/ruby/openssl/pull/493)
Add OpenSSL::SSL::SSLContext#ciphersuites= method along with unit tests.
https://github.com/ruby/openssl/commit/12250c7cef
|
|
RFC 6066 states how some wildcard SAN entries MAY be handled, but
it does not say they MUST be handled. LibreSSL 3.5.0 only handles
suffix wildcard SANs, not prefix wildcard SANs, or interior
wildcard SANs, so return early from the wildcard SAN tests on
LibreSSL 3.5.0.
Fixes #471
https://github.com/ruby/openssl/commit/717d7009d6
|
|
Use the combination of TLS 1.2 and TLS 1.3 instead of TLS 1.1 and TLS
1.2 so that will the test case will be run on latest platforms.
https://github.com/ruby/openssl/commit/e168df0f35
|
|
Use a different invalid data example to prevent SSLSocket#accept from
reaching EOF.
https://github.com/ruby/openssl/commit/2e089c1916
|
|
test_connect_certificate_verify_failed_exception_message occasionally
fails. Is it possible that OpenSSL sees a different clock from Ruby by
more than 10 seconds?
http://ci.rvm.jp/logfiles/brlog.trunk-random0.20211111-072828
Let's give more time after the certificate expiration date to see if
this fixes the flakiness. We had similar occasional failures in
test_x509store.rb before, which disappeared after ruby/ruby commit
7930a352a57c and ruby/openssl commit fb2fcbb13734.
|
|
OpenSSL::SSL::SSLSocket allowed #read and #write to be called before an
SSL/TLS handshake is completed. They passed unencrypted data to the
underlying socket.
This behavior is very odd to have in this library. A verbose mode
warning "SSL session is not started yet" was emitted whenever this
happened. It also didn't behave well with OpenSSL::Buffering. Let's
just get rid of it.
Fixes: https://github.com/ruby/openssl/issues/9
https://github.com/ruby/openssl/commit/bf780748b3
|
|
The Ruby tree disallows assert_raises.
https://github.com/ruby/openssl/commit/9b4f761e74
|
|
a file
SSLSocket#connect eventually calls `GetOpenFile` in order to get the
underlying file descriptor for the IO object passed in on
initialization. `GetOpenFile` assumes that the Ruby object passed in is
a T_FILE object and just casts it to a T_FILE without any checks. If
you pass an object that *isn't* a T_FILE to that function, the program
will segv.
Since we assume the IO object is a file in the `connect` method, this
commit adds a `CheckType` in the initialize method to ensure that the IO
object is actually a T_FILE. If the object *isn't* a T_FILE, this class
will segv on `connect`, so I think this is a backwards compatible
change.
https://github.com/ruby/openssl/commit/919fa44ec2
|
|
A certificate can only have one SubjectAltName extension. OpenSSL 3.0
performs a stricter validation and certificates containing multiple SANs
will be rejected.
https://github.com/ruby/openssl/commit/558cfbe5f5
|
|
message
OpenSSL 3.0 slightly changed the error message for a certificate
verification failure when an untrusted self-signed certificate is found
in the chain.
https://github.com/ruby/openssl/commit/b5a0a19850
|
|
Disabling ECC support of OpenSSL is impractical nowadays.
We still try to have the C extension compile on no-ec builds (as well
as no-dh or no-engine, etc.) as long as we can, but keeping test cases
for such an extreme scenario is not worth the effort.
https://github.com/ruby/openssl/commit/2cd01d4676
|
|
Current versions of OpenSSL and LibreSSL all support TLS 1.2, so there
is no need for checking the availability.
https://github.com/ruby/openssl/commit/a175a41529
|
|
LibreSSL
LibreSSL 2.2.x has a bug in the Finished message handling with TLS 1.3.
This is fixed by LibreSSL 3.3.2.
https://github.com/ruby/openssl/commit/0bea59d245
|
|
Provide a wrapper of SSL_set0_tmp_dh_pkey()/SSL_CTX_set_tmp_dh(), which
sets the DH parameters used for ephemeral DH key exchange.
SSLContext#tmp_dh_callback= already exists for this purpose, as a
wrapper around SSL_CTX_set_tmp_dh_callback(), but it is considered
obsolete and the OpenSSL API is deprecated for future removal. There is
no practical use case where an application needs to use different DH
parameters nowadays. This was originally introduced to support export
grade ciphers.
RDoc for #tmp_dh_callback= is updated to recommend the new #tmp_dh=.
Note that current versions of OpenSSL support automatic ECDHE curve
selection which is enabled by default. SSLContext#tmp_dh= should only be
necessary if you must allow ancient clients which don't support ECDHE.
https://github.com/ruby/openssl/commit/aa43da4f04
|
|
https://github.com/ruby/openssl/commit/8a1e3f5085
|
|
Normal sockets respond to `getbyte`, so we should make SSLSocket respond
to `getbyte` as well. This way we can substitute SSLSockets for regular
sockets.
https://github.com/ruby/openssl/commit/ac1490b7c9
|
|
Clean up old version guards in preparation for the upcoming OpenSSL 3.0
support.
OpenSSL 1.0.1 reached its EOL on 2016-12-31. At that time, we decided
to keep 1.0.1 support because many major Linux distributions were still
shipped with 1.0.1. Now, nearly 4 years later, most Linux distributions
are reaching their EOL and it should be safe to assume nobody uses them
anymore. Major ones that were using 1.0.1:
- Ubuntu 14.04 is EOL since 2019-04-30
- RHEL 6 will reach EOL on 2020-11-30
LibreSSL 3.0 and older versions are no longer supported by the LibreSSL
team as of October 2020.
Note that OpenSSL 1.0.2 also reached EOL on 2019-12-31 and 1.1.0 also
did on 2018-08-31.
https://github.com/ruby/openssl/commit/c055938f4b
|
|
LibreSSL 3.2.4 made the certificate verification logic back closer to
pre-3.2.2 one, which is more compatible with OpenSSL.
Part of the fixes added by commit a0e98d48c91f ("Enhance TLS 1.3 support
on LibreSSL 3.2/3.3", 2020-12-03) is required for 3.2.2 and 3.2.3 only
(and ~3.3.1, however 3.3 does not have a stable release yet). Since both
releases are security fix, it should be safe to remove those special
treatment from our test suite.
While we are at it, TestSSL#test_ecdh_curves is split into TLS 1.2 and
TLS 1.3 variants for clarity.
https://github.com/ruby/openssl/commit/a9954bac22
Notes:
Merged: https://github.com/ruby/ruby/pull/4275
|
|
This defines TLS1_3_VERSION when using LibreSSL 3.2+. LibreSSL 3.2/3.3
doesn't advertise this by default, even though it will use TLS 1.3
in both client and server modes.
Changes between LibreSSL 3.1 and 3.2/3.3 broke a few tests, Defining
TLS1_3_VERSION by itself fixes 1 test failure. A few tests now
fail on LibreSSL 3.2/3.3 unless TLS 1.2 is set as the maximum version,
and this adjusts those tests. The client CA test doesn't work in
LibreSSL 3.2+, so I've marked that as pending.
For the hostname verification, LibreSSL 3.2.2+ has a new stricter
hostname verifier that doesn't like subjectAltName such as
c*.example.com and d.*.example.com, so adjust the related tests.
With these changes, the tests pass on LibreSSL 3.2/3.3.
https://github.com/ruby/openssl/commit/a0e98d48c9
Notes:
Merged: https://github.com/ruby/ruby/pull/4275
|
|
The underlying API SSL_CTX_set_tmp_ecdh_callback() was removed by
LibreSSL >= 2.6.1 and OpenSSL >= 1.1.0, in other words, it is not
supported by any non-EOL versions of OpenSSL.
The wrapper was initially implemented in Ruby 2.3 and has been
deprecated since Ruby/OpenSSL 2.0 (bundled with Ruby 2.4) with explicit
warning with rb_warn().
https://github.com/ruby/openssl/commit/ee037e1460
Notes:
Merged: https://github.com/ruby/ruby/pull/4275
|
|
values
SSLContext's verify_mode expects an SSL_VERIFY_* constant (an integer)
and verify_hostname expects either true or false. However, they are set
to nil after calling OpenSSL::SSL::SSLContext.new, which is surprising.
Set a proper value to them by default: verify_mode is set to
OpenSSL::SSL::VERIFY_NONE and verify_hostname is set to false by
default.
Note that this does not change the default behavior. The certificate
verification was never performed unless verify_mode is set to
OpenSSL::SSL::VERIFY_PEER by a user. The same applies to
verify_hostname.
https://github.com/ruby/openssl/commit/87d869352c
Notes:
Merged: https://github.com/ruby/ruby/pull/4275
|
|
Add explicit test cases for the behaviors with different verify_mode.
If we made a bug in verify_mode, we would notice it by failures of other
test cases, but there were no dedicated test cases for verify_mode.
https://github.com/ruby/openssl/commit/1ccdc05662
Notes:
Merged: https://github.com/ruby/ruby/pull/4275
|
|
The current test_client_auth_public_key test case checks that supplying
a PKey containing only public components through client_cert_cb will
cause handshake to fail. While this is a correct behavior as a whole,
the assertions are misleading in the sense that giving a public key is
causing the failure. Actually, the handshake fails because a client
certificate is not supplied at all, as a result of ArgumentError that is
silently ignored.
Rename the test case to test_client_cert_cb_ignore_error and simplify it
to clarify what it is testing.
https://github.com/ruby/openssl/commit/785b5569fc
Notes:
Merged: https://github.com/ruby/ruby/pull/4275
|
|
Fix test_socket_open_with_local_address_port_context.
Often with MinGW, it seems EACCES is returned on bind when the port
number is unavailable. Ignore it just as we do for EADDRINUSE and
continue searching free port number.
Fixes: 98f8787b4687 ("test/openssl/test_ssl: fix random failure in
SSLSocket.open test", 2020-02-17)
https://github.com/ruby/openssl/commit/413b15526e
Notes:
Merged: https://github.com/ruby/ruby/pull/4275
|
|
Let's revert the changes for now, as it cannot be included in the 2.2.0
release.
My comment on #257:
> A blocker is OpenSSL::SSL::SSLContext#add_certificate_chain_file. It
> has a pending change and I don't want to include it in an incomplete
> state.
>
> The initial implementation in commit 46e4bdba40c5 was not really
> useful. The issue is described in #305. #309 extended it
> to take the corresponding private key together. However, the new
> implementation was incompatible on Windows and was reverted by #320 to
> the initial one.
>
> (The prerequisite to implement it in) an alternative way is #288, and
> it's still cooking.
This effectively reverts the following commits:
- dacd08937ccd ("ssl: suppress test failure with SSLContext#add_certificate_chain_file", 2020-03-09)
- 46e4bdba40c5 ("Add support for SSL_CTX_use_certificate_chain_file. Fixes #254.", 2019-06-13)
https://github.com/ruby/openssl/commit/ea925619a9
|
|
"test_close_after_socket_close" checks if ssl.close is no-op even after
the wrapped socket is closed. The test itself is fair, but the other
endpoint that is reading the SSL connection may fail with SSLError:
"SSL_read: unexpected eof while reading" in some environments:
https://github.com/ruby/ruby/actions/runs/60085389 (MinGW)
https://rubyci.org/logs/rubyci.s3.amazonaws.com/android28-x86_64/ruby-master/log/20200321T034442Z.fail.html.gz
```
1) Failure:
OpenSSL::TestSSL#test_close_after_socket_close [D:/a/ruby/ruby/src/test/openssl/utils.rb:299]:
exceptions on 1 threads:
SSL_read: unexpected eof while reading
```
This changeset rescues and ignores the SSLError in the test.
|
|
Import current master (2c43241dc0ed) of ruby/openssl.git.
Below are the commits that were made since the last batch at commit
b99775b163ce (ruby/openssl.git commit f49e7110ca1e). Note that some of
them have been applied already.
----------------------------------------------------------------
Benoit Daloze (1):
Remove redundant and ignored workflow file
DBL-Lee (1):
add support for SHA512_256/SHA512_224
Hiroshi SHIBATA (2):
Guard for OpenSSL::PKey::EC::Group::Error with unsupported platforms
Fixed inconsistency directory structure with ruby/ruby repo
Jeremy Evans (2):
Fix keyword argument separation issues in OpenSSL::SSL::SSLSocket#sys{read,write}_nonblock
Remove taint support
Kazuki Yamaguchi (26):
config: support .include directive
random: make OpenSSL::Random.pseudo_bytes alias of .random_bytes
extconf.rb: get rid of -Werror=deprecated-declarations
test/openssl/test_ssl: skip test_fallback_scsv if necessary
ts: simplify OpenSSL::Timestamp::Request#algorithm
History.md: add missing references to GitHub issues
config: deprecate OpenSSL::Config#add_value and #[]=
test/openssl/test_ssl: remove sleep from test_finished_messages
test/openssl/test_ssl: fix random failure in SSLSocket.open test
test/openssl/test_ssl: avoid explicitly-sized private keys
test/openssl/test_ssl: remove commented-out test case
test/openssl/test_ssl: allow kRSA tests to fail
ssl: avoid declarations after statements
engine: revert OpenSSL::Engine.load changes for cloudhsm
engine: remove really outdated static engines
engine: do not check for ENGINE_load_builtin_engines()
engine: fix guards for 'dynamic' and 'cryptodev' engines
lib/openssl.rb: require openssl/version.rb
x509: add error code and verify flags constants
ssl: set verify error code in the case of verify_hostname failure
.github/workflows: merge CI jobs into a single workflow
.github/workflows: test against different OpenSSL versions
.travis.yml: fully migrate to GitHub Actions
ssl: suppress test failure with SSLContext#add_certificate_chain_file
ssl: remove test case test_puts_meta from test_pair
Revert "Use version.rb in gemspec"
MSP-Greg (2):
.travis.yml - remove 2.3/1.0.2, 2.5/1.1.1, head/1.0.2
Use version.rb in gemspec
Samuel Williams (1):
Restore compatibility with older versions of Ruby.
Yusuke Endoh (1):
Make OpenSSL::OSSL#test_memcmp_timing robust
|
|
OpenSSL::TestSSL#test_fallback_scsv"
A skip guard for test_fallback_scsv has been added in upstream
repository.
|
|
Run the test case only when the OpenSSL supports both TLS 1.1 and TLS
1.2. Note that the fallback SCSV mechanism is for TLS 1.2 or older and
not for 1.3.
Fixes: https://github.com/ruby/openssl/issues/336
https://github.com/ruby/openssl/commit/6f2e6d7cf7
|
|
on OpenSSL 1.1.1d or later.
https://github.com/ruby/openssl/issues/336
|
|
It fails due to "error:140AB18F:SSL routines:SSL_CTX_use_certificate:ee
key too small". This is a tentative measurement to avoid the failure.
https://rubyci.org/logs/rubyci.s3.amazonaws.com/debian/ruby-master/log/20200216T093010Z.fail.html.gz
test/openssl/fixture/chain/server.key should be longer.
It should be documented how to create the files.
BTW, it would be a good idea to dynamically create a key during test
instead of fixed files.
|
|
Import the master branch of ruby/openssl for preparing to release openssl-2.2.0
Notes:
Merged-By: hsbt <hsbt@ruby-lang.org>
|
|
OpenSSL::SSL::SSLSocket#sys{read,write}_nonblock
It's unlikely anyone would actually hit these. The methods are
private, you only hit this code path if calling these methods
before performing the SSL connection, and there is already a
verbose warning issued.
Notes:
Merged: https://github.com/ruby/ruby/pull/2484
|
|
OpenSSL 1.1.1 rejects some shorter keys, which caused some failures of
`make test-all TESTS=openssl`.
https://rubyci.org/logs/rubyci.s3.amazonaws.com/debian/ruby-master/log/20190606T003005Z.fail.html.gz
This change merges 6bbc31ddd1 and 63fb3a36d1 in
https://github.com/ruby/openssl.
Reference: https://github.com/ruby/openssl/pull/217
|
|
Sync with the current tip of master branch, 62436385306c of
ruby/openssl.git. Changes can be found at:
https://github.com/ruby/openssl/compare/v2.1.1...62436385306c
----------------------------------------------------------------
Brian Cunnie (1):
Correctly verify abbreviated IPv6 SANs
Janko Marohnić (1):
Reduce memory allocation when writing to SSLSocket
Jeremy Evans (1):
Move rb_global_variable call to directly after assignment
Kazuki Yamaguchi (7):
pkcs7: allow recipient's certificate to be omitted for PKCS7#decrypt
pkey: resume key generation after interrupt
tool/ruby-openssl-docker: update to latest versions
test/test_ssl: fix test failure with TLS 1.3
test/test_x509name: change script encoding to ASCII-8BIT
x509name: refactor OpenSSL::X509::Name#to_s
x509name: fix handling of X509_NAME_{oneline,print_ex}() return value
ahadc (1):
Update CONTRIBUTING.md
nobu (6):
no ID cache in Init functions
search winsock libraries explicitly
openssl: search winsock
openssl_missing.h: constified
reduce LibreSSL warnings
openssl/buffering.rb: no RS when output
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64233 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
|
|
* The warnings are shown by Thread.report_on_exception defaulting to
true. [Feature #14143] [ruby-core:83979]
* Improves tests by narrowing down the scope where an exception
is expected.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61188 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
|