diff options
Diffstat (limited to 'tool/lib/minitest/unit.rb')
-rw-r--r-- | tool/lib/minitest/unit.rb | 1475 |
1 files changed, 0 insertions, 1475 deletions
diff --git a/tool/lib/minitest/unit.rb b/tool/lib/minitest/unit.rb deleted file mode 100644 index ddd7cfe74d..0000000000 --- a/tool/lib/minitest/unit.rb +++ /dev/null @@ -1,1475 +0,0 @@ -# encoding: utf-8 -# frozen_string_literal: true - -require "optparse" -require "rbconfig" -require "leakchecker" - -## -# Minimal (mostly drop-in) replacement for test-unit. -# -# :include: README.txt - -module MiniTest - - def self.const_missing name # :nodoc: - case name - when :MINI_DIR then - msg = "MiniTest::MINI_DIR was removed. Don't violate other's internals." - warn "WAR\NING: #{msg}" - warn "WAR\NING: Used by #{caller.first}." - const_set :MINI_DIR, "bad value" - else - super - end - end - - ## - # Assertion base class - - class Assertion < Exception; end - - ## - # Assertion raised when skipping a test - - class Skip < Assertion; end - - class << self - ## - # Filter object for backtraces. - - attr_accessor :backtrace_filter - end - - class BacktraceFilter # :nodoc: - def filter bt - return ["No backtrace"] unless bt - - new_bt = [] - - unless $DEBUG then - bt.each do |line| - break if line =~ /lib\/minitest/ - new_bt << line - end - - new_bt = bt.reject { |line| line =~ /lib\/minitest/ } if new_bt.empty? - new_bt = bt.dup if new_bt.empty? - else - new_bt = bt.dup - end - - new_bt - end - end - - self.backtrace_filter = BacktraceFilter.new - - def self.filter_backtrace bt # :nodoc: - backtrace_filter.filter bt - end - - ## - # MiniTest Assertions. All assertion methods accept a +msg+ which is - # printed if the assertion fails. - - module Assertions - ## - # Returns the diff command to use in #diff. Tries to intelligently - # figure out what diff to use. - - def self.diff - unless defined? @diff - exe = RbConfig::CONFIG['EXEEXT'] - @diff = %W"gdiff#{exe} diff#{exe}".find do |diff| - if system(diff, "-u", __FILE__, __FILE__) - break "#{diff} -u" - end - end - end - - @diff - end - - ## - # Set the diff command to use in #diff. - - def self.diff= o - @diff = o - end - - ## - # Returns a diff between +exp+ and +act+. If there is no known - # diff command or if it doesn't make sense to diff the output - # (single line, short output), then it simply returns a basic - # comparison between the two. - - def diff exp, act - require "tempfile" - - expect = mu_pp_for_diff exp - butwas = mu_pp_for_diff act - result = nil - - need_to_diff = - MiniTest::Assertions.diff && - (expect.include?("\n") || - butwas.include?("\n") || - expect.size > 30 || - butwas.size > 30 || - expect == butwas) - - return "Expected: #{mu_pp exp}\n Actual: #{mu_pp act}" unless - need_to_diff - - tempfile_a = nil - tempfile_b = nil - - Tempfile.open("expect") do |a| - tempfile_a = a - a.puts expect - a.flush - - Tempfile.open("butwas") do |b| - tempfile_b = b - b.puts butwas - b.flush - - result = `#{MiniTest::Assertions.diff} #{a.path} #{b.path}` - result.sub!(/^\-\-\- .+/, "--- expected") - result.sub!(/^\+\+\+ .+/, "+++ actual") - - if result.empty? then - klass = exp.class - result = [ - "No visible difference in the #{klass}#inspect output.\n", - "You should look at the implementation of #== on ", - "#{klass} or its members.\n", - expect, - ].join - end - end - end - - result - ensure - tempfile_a.close! if tempfile_a - tempfile_b.close! if tempfile_b - end - - ## - # This returns a human-readable version of +obj+. By default - # #inspect is called. You can override this to use #pretty_print - # if you want. - - def mu_pp obj - s = obj.inspect - s = s.encode Encoding.default_external if defined? Encoding - s - end - - ## - # This returns a diff-able human-readable version of +obj+. This - # differs from the regular mu_pp because it expands escaped - # newlines and makes hex-values generic (like object_ids). This - # uses mu_pp to do the first pass and then cleans it up. - - def mu_pp_for_diff obj - mu_pp(obj).gsub(/(?<!\\)(?:\\\\)*\K\\n/, "\n").gsub(/:0x[a-fA-F0-9]{4,}/m, ':0xXXXXXX') - end - - def _assertions= n # :nodoc: - @_assertions = n - end - alias assertions= _assertions= - - def _assertions # :nodoc: - @_assertions ||= 0 - end - alias assertions _assertions - - ## - # Fails unless +test+ is a true value. - - def assert test, msg = nil - msg ||= "Failed assertion, no message given." - self._assertions += 1 - unless test then - msg = msg.call if Proc === msg - raise MiniTest::Assertion, msg - end - true - end - - ## - # Fails unless +obj+ is empty. - - def assert_empty obj, msg = nil - msg = message(msg) { "Expected #{mu_pp(obj)} to be empty" } - assert_respond_to obj, :empty? - assert obj.empty?, msg - end - - ## - # Fails unless <tt>exp == act</tt> printing the difference between - # the two, if possible. - # - # If there is no visible difference but the assertion fails, you - # should suspect that your #== is buggy, or your inspect output is - # missing crucial details. - # - # For floats use assert_in_delta. - # - # See also: MiniTest::Assertions.diff - - def assert_equal exp, act, msg = nil - msg = message(msg, "") { diff exp, act } - assert exp == act, msg - end - - ## - # For comparing Floats. Fails unless +exp+ and +act+ are within +delta+ - # of each other. - # - # assert_in_delta Math::PI, (22.0 / 7.0), 0.01 - - def assert_in_delta exp, act, delta = 0.001, msg = nil - n = (exp - act).abs - msg = message(msg) { - "Expected |#{exp} - #{act}| (#{n}) to be <= #{delta}" - } - assert delta >= n, msg - end - - ## - # For comparing Floats. Fails unless +exp+ and +act+ have a relative - # error less than +epsilon+. - - def assert_in_epsilon a, b, epsilon = 0.001, msg = nil - assert_in_delta a, b, [a.abs, b.abs].min * epsilon, msg - end - - ## - # Fails unless +collection+ includes +obj+. - - def assert_includes collection, obj, msg = nil - msg = message(msg) { - "Expected #{mu_pp(collection)} to include #{mu_pp(obj)}" - } - assert_respond_to collection, :include? - assert collection.include?(obj), msg - end - - ## - # Fails unless +obj+ is an instance of +cls+. - - def assert_instance_of cls, obj, msg = nil - msg = message(msg) { - "Expected #{mu_pp(obj)} to be an instance of #{cls}, not #{obj.class}" - } - - assert obj.instance_of?(cls), msg - end - - ## - # Fails unless +obj+ is a kind of +cls+. - - def assert_kind_of cls, obj, msg = nil # TODO: merge with instance_of - msg = message(msg) { - "Expected #{mu_pp(obj)} to be a kind of #{cls}, not #{obj.class}" } - - assert obj.kind_of?(cls), msg - end - - ## - # Fails unless +matcher+ <tt>=~</tt> +obj+. - - def assert_match matcher, obj, msg = nil - msg = message(msg) { "Expected #{mu_pp matcher} to match #{mu_pp obj}" } - assert_respond_to matcher, :"=~" - matcher = Regexp.new Regexp.escape matcher if String === matcher - assert matcher =~ obj, msg - end - - ## - # Fails unless +obj+ is nil - - def assert_nil obj, msg = nil - msg = message(msg) { "Expected #{mu_pp(obj)} to be nil" } - assert obj.nil?, msg - end - - ## - # For testing with binary operators. - # - # assert_operator 5, :<=, 4 - - def assert_operator o1, op, o2 = (predicate = true; nil), msg = nil - return assert_predicate o1, op, msg if predicate - msg = message(msg) { "Expected #{mu_pp(o1)} to be #{op} #{mu_pp(o2)}" } - assert o1.__send__(op, o2), msg - end - - ## - # Fails if stdout or stderr do not output the expected results. - # Pass in nil if you don't care about that streams output. Pass in - # "" if you require it to be silent. Pass in a regexp if you want - # to pattern match. - # - # NOTE: this uses #capture_io, not #capture_subprocess_io. - # - # See also: #assert_silent - - def assert_output stdout = nil, stderr = nil - out, err = capture_io do - yield - end - - err_msg = Regexp === stderr ? :assert_match : :assert_equal if stderr - out_msg = Regexp === stdout ? :assert_match : :assert_equal if stdout - - y = send err_msg, stderr, err, "In stderr" if err_msg - x = send out_msg, stdout, out, "In stdout" if out_msg - - (!stdout || x) && (!stderr || y) - end - - ## - # For testing with predicates. - # - # assert_predicate str, :empty? - # - # This is really meant for specs and is front-ended by assert_operator: - # - # str.must_be :empty? - - def assert_predicate o1, op, msg = nil - msg = message(msg) { "Expected #{mu_pp(o1)} to be #{op}" } - assert o1.__send__(op), msg - end - - ## - # Fails unless the block raises one of +exp+. Returns the - # exception matched so you can check the message, attributes, etc. - - def assert_raises *exp - msg = "#{exp.pop}.\n" if String === exp.last - - begin - yield - rescue MiniTest::Skip => e - return e if exp.include? MiniTest::Skip - raise e - rescue Exception => e - expected = exp.any? { |ex| - if ex.instance_of? Module then - e.kind_of? ex - else - e.instance_of? ex - end - } - - assert expected, proc { - exception_details(e, "#{msg}#{mu_pp(exp)} exception expected, not") - } - - return e - end - - exp = exp.first if exp.size == 1 - - flunk "#{msg}#{mu_pp(exp)} expected but nothing was raised." - end - - ## - # Fails unless +obj+ responds to +meth+. - - def assert_respond_to obj, meth, msg = nil - msg = message(msg) { - "Expected #{mu_pp(obj)} (#{obj.class}) to respond to ##{meth}" - } - assert obj.respond_to?(meth), msg - end - - ## - # Fails unless +exp+ and +act+ are #equal? - - def assert_same exp, act, msg = nil - msg = message(msg) { - data = [mu_pp(act), act.object_id, mu_pp(exp), exp.object_id] - "Expected %s (oid=%d) to be the same as %s (oid=%d)" % data - } - assert exp.equal?(act), msg - end - - ## - # +send_ary+ is a receiver, message and arguments. - # - # Fails unless the call returns a true value - # TODO: I should prolly remove this from specs - - def assert_send send_ary, m = nil - recv, msg, *args = send_ary - m = message(m) { - "Expected #{mu_pp(recv)}.#{msg}(*#{mu_pp(args)}) to return true" } - assert recv.__send__(msg, *args), m - end - - ## - # Fails if the block outputs anything to stderr or stdout. - # - # See also: #assert_output - - def assert_silent - assert_output "", "" do - yield - end - end - - ## - # Fails unless the block throws +sym+ - - def assert_throws sym, msg = nil - default = "Expected #{mu_pp(sym)} to have been thrown" - caught = true - catch(sym) do - begin - yield - rescue ThreadError => e # wtf?!? 1.8 + threads == suck - default += ", not \:#{e.message[/uncaught throw \`(\w+?)\'/, 1]}" - rescue ArgumentError => e # 1.9 exception - default += ", not #{e.message.split(/ /).last}" - rescue NameError => e # 1.8 exception - default += ", not #{e.name.inspect}" - end - caught = false - end - - assert caught, message(msg) { default } - end - - def assert_path_exists(path, msg = nil) - msg = message(msg) { "Expected path '#{path}' to exist" } - assert File.exist?(path), msg - end - - def refute_path_exists(path, msg = nil) - msg = message(msg) { "Expected path '#{path}' to not exist" } - refute File.exist?(path), msg - end - - ## - # Captures $stdout and $stderr into strings: - # - # out, err = capture_io do - # puts "Some info" - # warn "You did a bad thing" - # end - # - # assert_match %r%info%, out - # assert_match %r%bad%, err - # - # NOTE: For efficiency, this method uses StringIO and does not - # capture IO for subprocesses. Use #capture_subprocess_io for - # that. - - def capture_io - require 'stringio' - - captured_stdout, captured_stderr = StringIO.new, StringIO.new - - synchronize do - orig_stdout, orig_stderr = $stdout, $stderr - $stdout, $stderr = captured_stdout, captured_stderr - - begin - yield - ensure - $stdout = orig_stdout - $stderr = orig_stderr - end - end - - return captured_stdout.string, captured_stderr.string - end - alias capture_output capture_io - - ## - # Captures $stdout and $stderr into strings, using Tempfile to - # ensure that subprocess IO is captured as well. - # - # out, err = capture_subprocess_io do - # system "echo Some info" - # system "echo You did a bad thing 1>&2" - # end - # - # assert_match %r%info%, out - # assert_match %r%bad%, err - # - # NOTE: This method is approximately 10x slower than #capture_io so - # only use it when you need to test the output of a subprocess. - - def capture_subprocess_io - require 'tempfile' - - captured_stdout, captured_stderr = Tempfile.new("out"), Tempfile.new("err") - - synchronize do - orig_stdout, orig_stderr = $stdout.dup, $stderr.dup - $stdout.reopen captured_stdout - $stderr.reopen captured_stderr - - begin - yield - - $stdout.rewind - $stderr.rewind - - [captured_stdout.read, captured_stderr.read] - ensure - $stdout.reopen orig_stdout - $stderr.reopen orig_stderr - orig_stdout.close - orig_stderr.close - captured_stdout.close! - captured_stderr.close! - end - end - end - - ## - # Returns details for exception +e+ - - def exception_details e, msg - [ - "#{msg}", - "Class: <#{e.class}>", - "Message: <#{e.message.inspect}>", - "---Backtrace---", - "#{MiniTest::filter_backtrace(e.backtrace).join("\n")}", - "---------------", - ].join "\n" - end - - ## - # Fails with +msg+ - - def flunk msg = nil - msg ||= "Epic Fail!" - assert false, msg - end - - ## - # Returns a proc that will output +msg+ along with the default message. - - def message msg = nil, ending = ".", &default - proc { - msg = msg.call.chomp(".") if Proc === msg - custom_message = "#{msg}.\n" unless msg.nil? or msg.to_s.empty? - "#{custom_message}#{default.call}#{ending}" - } - end - - ## - # used for counting assertions - - def pass msg = nil - assert true - end - - ## - # Fails if +test+ is a true value - - def refute test, msg = nil - msg ||= "Failed refutation, no message given" - not assert(! test, msg) - end - - ## - # Fails if +obj+ is empty. - - def refute_empty obj, msg = nil - msg = message(msg) { "Expected #{mu_pp(obj)} to not be empty" } - assert_respond_to obj, :empty? - refute obj.empty?, msg - end - - ## - # Fails if <tt>exp == act</tt>. - # - # For floats use refute_in_delta. - - def refute_equal exp, act, msg = nil - msg = message(msg) { - "Expected #{mu_pp(act)} to not be equal to #{mu_pp(exp)}" - } - refute exp == act, msg - end - - ## - # For comparing Floats. Fails if +exp+ is within +delta+ of +act+. - # - # refute_in_delta Math::PI, (22.0 / 7.0) - - def refute_in_delta exp, act, delta = 0.001, msg = nil - n = (exp - act).abs - msg = message(msg) { - "Expected |#{exp} - #{act}| (#{n}) to not be <= #{delta}" - } - refute delta >= n, msg - end - - ## - # For comparing Floats. Fails if +exp+ and +act+ have a relative error - # less than +epsilon+. - - def refute_in_epsilon a, b, epsilon = 0.001, msg = nil - refute_in_delta a, b, a * epsilon, msg - end - - ## - # Fails if +collection+ includes +obj+. - - def refute_includes collection, obj, msg = nil - msg = message(msg) { - "Expected #{mu_pp(collection)} to not include #{mu_pp(obj)}" - } - assert_respond_to collection, :include? - refute collection.include?(obj), msg - end - - ## - # Fails if +obj+ is an instance of +cls+. - - def refute_instance_of cls, obj, msg = nil - msg = message(msg) { - "Expected #{mu_pp(obj)} to not be an instance of #{cls}" - } - refute obj.instance_of?(cls), msg - end - - ## - # Fails if +obj+ is a kind of +cls+. - - def refute_kind_of cls, obj, msg = nil # TODO: merge with instance_of - msg = message(msg) { "Expected #{mu_pp(obj)} to not be a kind of #{cls}" } - refute obj.kind_of?(cls), msg - end - - ## - # Fails if +matcher+ <tt>=~</tt> +obj+. - - def refute_match matcher, obj, msg = nil - msg = message(msg) {"Expected #{mu_pp matcher} to not match #{mu_pp obj}"} - assert_respond_to matcher, :"=~" - matcher = Regexp.new Regexp.escape matcher if String === matcher - refute matcher =~ obj, msg - end - - ## - # Fails if +obj+ is nil. - - def refute_nil obj, msg = nil - msg = message(msg) { "Expected #{mu_pp(obj)} to not be nil" } - refute obj.nil?, msg - end - - ## - # Fails if +o1+ is not +op+ +o2+. Eg: - # - # refute_operator 1, :>, 2 #=> pass - # refute_operator 1, :<, 2 #=> fail - - def refute_operator o1, op, o2 = (predicate = true; nil), msg = nil - return refute_predicate o1, op, msg if predicate - msg = message(msg) { "Expected #{mu_pp(o1)} to not be #{op} #{mu_pp(o2)}"} - refute o1.__send__(op, o2), msg - end - - ## - # For testing with predicates. - # - # refute_predicate str, :empty? - # - # This is really meant for specs and is front-ended by refute_operator: - # - # str.wont_be :empty? - - def refute_predicate o1, op, msg = nil - msg = message(msg) { "Expected #{mu_pp(o1)} to not be #{op}" } - refute o1.__send__(op), msg - end - - ## - # Fails if +obj+ responds to the message +meth+. - - def refute_respond_to obj, meth, msg = nil - msg = message(msg) { "Expected #{mu_pp(obj)} to not respond to #{meth}" } - - refute obj.respond_to?(meth), msg - end - - ## - # Fails if +exp+ is the same (by object identity) as +act+. - - def refute_same exp, act, msg = nil - msg = message(msg) { - data = [mu_pp(act), act.object_id, mu_pp(exp), exp.object_id] - "Expected %s (oid=%d) to not be the same as %s (oid=%d)" % data - } - refute exp.equal?(act), msg - end - - ## - # Skips the current test. Gets listed at the end of the run but - # doesn't cause a failure exit code. - - def skip msg = nil, bt = caller - msg ||= "Skipped, no message given" - @skip = true - raise MiniTest::Skip, msg, bt - end - - alias omit skip - - ## - # Was this testcase skipped? Meant for #teardown. - - def skipped? - defined?(@skip) and @skip - end - - ## - # Takes a block and wraps it with the runner's shared mutex. - - def synchronize - Minitest::Unit.runner.synchronize do - yield - end - end - end - - class Unit # :nodoc: - VERSION = "4.7.5" # :nodoc: - - attr_accessor :report, :failures, :errors, :skips # :nodoc: - attr_accessor :assertion_count # :nodoc: - attr_writer :test_count # :nodoc: - attr_accessor :start_time # :nodoc: - attr_accessor :help # :nodoc: - attr_accessor :verbose # :nodoc: - attr_writer :options # :nodoc: - - ## - # :attr: - # - # if true, installs an "INFO" signal handler (only available to BSD and - # OS X users) which prints diagnostic information about the test run. - # - # This is auto-detected by default but may be overridden by custom - # runners. - - attr_accessor :info_signal - - ## - # Lazy accessor for options. - - def options - @options ||= {seed: 42} - end - - @@installed_at_exit ||= false - @@out = $stdout - @@after_tests = [] - @@current_repeat_count = 0 - - ## - # A simple hook allowing you to run a block of code after _all_ of - # the tests are done. Eg: - # - # MiniTest::Unit.after_tests { p $debugging_info } - - def self.after_tests &block - @@after_tests << block - end - - ## - # Registers MiniTest::Unit to run tests at process exit - - def self.autorun - at_exit { - # don't run if there was a non-exit exception - next if $! and not $!.kind_of? SystemExit - - # the order here is important. The at_exit handler must be - # installed before anyone else gets a chance to install their - # own, that way we can be assured that our exit will be last - # to run (at_exit stacks). - exit_code = nil - - at_exit { - @@after_tests.reverse_each(&:call) - exit false if exit_code && exit_code != 0 - } - - exit_code = MiniTest::Unit.new.run ARGV - } unless @@installed_at_exit - @@installed_at_exit = true - end - - ## - # Returns the stream to use for output. - - def self.output - @@out - end - - ## - # Sets MiniTest::Unit to write output to +stream+. $stdout is the default - # output - - def self.output= stream - @@out = stream - end - - ## - # Tells MiniTest::Unit to delegate to +runner+, an instance of a - # MiniTest::Unit subclass, when MiniTest::Unit#run is called. - - def self.runner= runner - @@runner = runner - end - - ## - # Returns the MiniTest::Unit subclass instance that will be used - # to run the tests. A MiniTest::Unit instance is the default - # runner. - - def self.runner - @@runner ||= self.new - end - - ## - # Return all plugins' run methods (methods that start with "run_"). - - def self.plugins - @@plugins ||= (["run_tests"] + - public_instance_methods(false). - grep(/^run_/).map { |s| s.to_s }).uniq - end - - ## - # Return the IO for output. - - def output - self.class.output - end - - def puts *a # :nodoc: - output.puts(*a) - end - - def print *a # :nodoc: - output.print(*a) - end - - def test_count # :nodoc: - @test_count ||= 0 - end - - ## - # Runner for a given +type+ (eg, test vs bench). - - def self.current_repeat_count - @@current_repeat_count - end - - def _run_anything type - suites = TestCase.send "#{type}_suites" - return if suites.empty? - - puts - puts "# Running #{type}s:" - puts - - @test_count, @assertion_count = 0, 0 - test_count = assertion_count = 0 - sync = output.respond_to? :"sync=" # stupid emacs - old_sync, output.sync = output.sync, true if sync - - @@current_repeat_count = 0 - begin - start = Time.now - - results = _run_suites suites, type - - @test_count = results.inject(0) { |sum, (tc, _)| sum + tc } - @assertion_count = results.inject(0) { |sum, (_, ac)| sum + ac } - test_count += @test_count - assertion_count += @assertion_count - t = Time.now - start - @@current_repeat_count += 1 - unless @repeat_count - puts - puts - end - puts "Finished%s %ss in %.6fs, %.4f tests/s, %.4f assertions/s.\n" % - [(@repeat_count ? "(#{@@current_repeat_count}/#{@repeat_count}) " : ""), type, - t, @test_count.fdiv(t), @assertion_count.fdiv(t)] - end while @repeat_count && @@current_repeat_count < @repeat_count && - report.empty? && failures.zero? && errors.zero? - - output.sync = old_sync if sync - - report.each_with_index do |msg, i| - puts "\n%3d) %s" % [i + 1, msg] - end - - puts - @test_count = test_count - @assertion_count = assertion_count - - status - end - - ## - # Runs all the +suites+ for a given +type+. - # - - def _run_suites suites, type - suites.map { |suite| _run_suite suite, type } - end - - ## - # Run a single +suite+ for a given +type+. - - def _run_suite suite, type - header = "#{type}_suite_header" - puts send(header, suite) if respond_to? header - - filter = options[:filter] || '/./' - filter = Regexp.new $1 if filter =~ /\/(.*)\// - - all_test_methods = suite.send "#{type}_methods" - - filtered_test_methods = all_test_methods.find_all { |m| - filter === m || filter === "#{suite}##{m}" - } - - leakchecker = LeakChecker.new - - continuation = proc do - assertions = filtered_test_methods.map { |method| - inst = suite.new method - inst._assertions = 0 - - print "#{suite}##{method} = " if @verbose - - start_time = Time.now if @verbose - result = inst.run self - - print "%.2f s = " % (Time.now - start_time) if @verbose - print result - puts if @verbose - $stdout.flush - - unless defined?(RubyVM::JIT) && RubyVM::JIT.enabled? # compiler process is wrongly considered as leak - leakchecker.check("#{inst.class}\##{inst.__name__}") - end - - inst._assertions - } - return assertions.size, assertions.inject(0) { |sum, n| sum + n } - end - - if ENV["LEAK_CHECKER_TRACE_OBJECT_ALLOCATION"] - require "objspace" - ObjectSpace.trace_object_allocations(&continuation) - else - continuation.call - end - end - - ## - # Record the result of a single test. Makes it very easy to gather - # information. Eg: - # - # class StatisticsRecorder < MiniTest::Unit - # def record suite, method, assertions, time, error - # # ... record the results somewhere ... - # end - # end - # - # MiniTest::Unit.runner = StatisticsRecorder.new - # - # NOTE: record might be sent more than once per test. It will be - # sent once with the results from the test itself. If there is a - # failure or error in teardown, it will be sent again with the - # error or failure. - - def record suite, method, assertions, time, error - end - - def location e # :nodoc: - last_before_assertion = "" - - return '<empty>' unless e.backtrace # SystemStackError can return nil. - - e.backtrace.reverse_each do |s| - break if s =~ /in .(assert|refute|flunk|pass|fail|raise|must|wont)/ - last_before_assertion = s - end - last_before_assertion.sub(/:in .*$/, '') - end - - ## - # Writes status for failed test +meth+ in +klass+ which finished with - # exception +e+ - - def puke klass, meth, e - e = case e - when MiniTest::Skip then - @skips += 1 - return "S" unless @verbose - "Skipped:\n#{klass}##{meth} [#{location e}]:\n#{e.message}\n" - when MiniTest::Assertion then - @failures += 1 - "Failure:\n#{klass}##{meth} [#{location e}]:\n#{e.message}\n" - else - @errors += 1 - bt = MiniTest::filter_backtrace(e.backtrace).join "\n " - "Error:\n#{klass}##{meth}:\n#{e.class}: #{e.message.b}\n #{bt}\n" - end - @report << e - e[0, 1] - end - - def initialize # :nodoc: - @report = [] - @errors = @failures = @skips = 0 - @verbose = false - @mutex = Thread::Mutex.new - @info_signal = Signal.list['INFO'] - @repeat_count = nil - end - - def synchronize # :nodoc: - if @mutex then - @mutex.synchronize { yield } - else - yield - end - end - - def process_args args = [] # :nodoc: - options = {} - orig_args = args.dup - - OptionParser.new do |opts| - opts.banner = 'minitest options:' - opts.version = MiniTest::Unit::VERSION - - opts.on '-h', '--help', 'Display this help.' do - puts opts - exit - end - - opts.on '-s', '--seed SEED', Integer, "Sets random seed" do |m| - options[:seed] = m.to_i - end - - opts.on '-v', '--verbose', "Verbose. Show progress processing files." do - options[:verbose] = true - end - - opts.on '-n', '--name PATTERN', "Filter test names on pattern (e.g. /foo/)" do |a| - options[:filter] = a - end - - opts.parse! args - orig_args -= args - end - - unless options[:seed] then - srand - options[:seed] = srand % 0xFFFF - orig_args << "--seed" << options[:seed].to_s - end - - srand options[:seed] - - self.verbose = options[:verbose] - @help = orig_args.map { |s| s =~ /[\s|&<>$()]/ ? s.inspect : s }.join " " - - options - end - - ## - # Begins the full test run. Delegates to +runner+'s #_run method. - - def run args = [] - self.class.runner._run(args) - end - - ## - # Top level driver, controls all output and filtering. - - def _run args = [] - args = process_args args # ARGH!! blame test/unit process_args - self.options.merge! args - - puts "Run options: #{help}" - - self.class.plugins.each do |plugin| - send plugin - break unless report.empty? - end - - return failures + errors if self.test_count > 0 # or return nil... - rescue Interrupt - abort 'Interrupted' - end - - ## - # Runs test suites matching +filter+. - - def run_tests - _run_anything :test - end - - ## - # Writes status to +io+ - - def status io = self.output - format = "%d tests, %d assertions, %d failures, %d errors, %d skips" - io.puts format % [test_count, assertion_count, failures, errors, skips] - end - - ## - # Provides a simple set of guards that you can use in your tests - # to skip execution if it is not applicable. These methods are - # mixed into TestCase as both instance and class methods so you - # can use them inside or outside of the test methods. - # - # def test_something_for_mri - # skip "bug 1234" if jruby? - # # ... - # end - # - # if windows? then - # # ... lots of test methods ... - # end - - module Guard - - ## - # Is this running on jruby? - - def jruby? platform = RUBY_PLATFORM - "java" == platform - end - - ## - # Is this running on mri? - - def maglev? platform = defined?(RUBY_ENGINE) && RUBY_ENGINE - "maglev" == platform - end - - module_function :maglev? - - ## - # Is this running on mri? - - def mri? platform = RUBY_DESCRIPTION - /^ruby/ =~ platform - end - - ## - # Is this running on rubinius? - - def rubinius? platform = defined?(RUBY_ENGINE) && RUBY_ENGINE - "rbx" == platform - end - - ## - # Is this running on windows? - - def windows? platform = RUBY_PLATFORM - /mswin|mingw/ =~ platform - end - - ## - # Is this running on mingw? - - def mingw? platform = RUBY_PLATFORM - /mingw/ =~ platform - end - - end - - ## - # Provides before/after hooks for setup and teardown. These are - # meant for library writers, NOT for regular test authors. See - # #before_setup for an example. - - module LifecycleHooks - ## - # Runs before every test, after setup. This hook is meant for - # libraries to extend minitest. It is not meant to be used by - # test developers. - # - # See #before_setup for an example. - - def after_setup; end - - ## - # Runs before every test, before setup. This hook is meant for - # libraries to extend minitest. It is not meant to be used by - # test developers. - # - # As a simplistic example: - # - # module MyMinitestPlugin - # def before_setup - # super - # # ... stuff to do before setup is run - # end - # - # def after_setup - # # ... stuff to do after setup is run - # super - # end - # - # def before_teardown - # super - # # ... stuff to do before teardown is run - # end - # - # def after_teardown - # # ... stuff to do after teardown is run - # super - # end - # end - # - # class MiniTest::Unit::TestCase - # include MyMinitestPlugin - # end - - def before_setup; end - - ## - # Runs after every test, before teardown. This hook is meant for - # libraries to extend minitest. It is not meant to be used by - # test developers. - # - # See #before_setup for an example. - - def before_teardown; end - - ## - # Runs after every test, after teardown. This hook is meant for - # libraries to extend minitest. It is not meant to be used by - # test developers. - # - # See #before_setup for an example. - - def after_teardown; end - end - - ## - # Subclass TestCase to create your own tests. Typically you'll want a - # TestCase subclass per implementation class. - # - # See MiniTest::Assertions - - class TestCase - include LifecycleHooks - include Guard - extend Guard - - attr_reader :__name__ # :nodoc: - - PASSTHROUGH_EXCEPTIONS = [NoMemoryError, SignalException, - Interrupt, SystemExit] # :nodoc: - - ## - # Runs the tests reporting the status to +runner+ - - def run runner - trap "INFO" do - runner.report.each_with_index do |msg, i| - warn "\n%3d) %s" % [i + 1, msg] - end - warn '' - time = runner.start_time ? Time.now - runner.start_time : 0 - warn "Current Test: %s#%s %.2fs" % [self.class, self.__name__, time] - runner.status $stderr - end if runner.info_signal - - start_time = Time.now - - result = "" - srand(runner.options[:seed]) - - begin - @passed = nil - self.before_setup - self.setup - self.after_setup - self.run_test self.__name__ - result = "." unless io? - time = Time.now - start_time - runner.record self.class, self.__name__, self._assertions, time, nil - @passed = true - rescue *PASSTHROUGH_EXCEPTIONS - raise - rescue Exception => e - @passed = Skip === e - time = Time.now - start_time - runner.record self.class, self.__name__, self._assertions, time, e - result = runner.puke self.class, self.__name__, e - ensure - %w{ before_teardown teardown after_teardown }.each do |hook| - begin - self.send hook - rescue *PASSTHROUGH_EXCEPTIONS - raise - rescue Exception => e - @passed = false - runner.record self.class, self.__name__, self._assertions, time, e - result = runner.puke self.class, self.__name__, e - end - end - trap 'INFO', 'DEFAULT' if runner.info_signal - end - result - end - - alias :run_test :__send__ - - def initialize name # :nodoc: - @__name__ = name - @__io__ = nil - @passed = nil - @@current = self # FIX: make thread local - end - - def self.current # :nodoc: - @@current # FIX: make thread local - end - - ## - # Return the output IO object - - def io - @__io__ = true - MiniTest::Unit.output - end - - ## - # Have we hooked up the IO yet? - - def io? - @__io__ - end - - def self.reset # :nodoc: - @@test_suites = {} - end - - reset - - ## - # Make diffs for this TestCase use #pretty_inspect so that diff - # in assert_equal can be more details. NOTE: this is much slower - # than the regular inspect but much more usable for complex - # objects. - - def self.make_my_diffs_pretty! - require 'pp' - - define_method :mu_pp do |o| - o.pretty_inspect - end - end - - def self.inherited klass # :nodoc: - @@test_suites[klass] = true - super - end - - def self.test_order # :nodoc: - :sorted - end - - def self.test_suites # :nodoc: - suites = @@test_suites.keys - - case self.test_order - when :random - # shuffle test suites based on CRC32 of their names - salt = "\n" + rand(1 << 32).to_s - crc_tbl = (0..255).map do |i| - (0..7).inject(i) {|c,| (c & 1 == 1) ? (0xEDB88320 ^ (c >> 1)) : (c >> 1) } - end - suites = suites.sort_by do |suite| - crc32 = 0xffffffff - (suite.name + salt).each_byte do |data| - crc32 = crc_tbl[(crc32 ^ data) & 0xff] ^ (crc32 >> 8) - end - crc32 ^ 0xffffffff - end - when :nosort - suites - else - suites.sort_by { |ts| ts.name.to_s } - end - end - - def self.test_methods # :nodoc: - methods = public_instance_methods(true).grep(/^test/).map { |m| m.to_s } - - case self.test_order - when :parallel - max = methods.size - ParallelEach.new methods.sort.sort_by { rand max } - when :random then - max = methods.size - methods.sort.sort_by { rand max } - when :alpha, :sorted then - methods.sort - when :nosort - methods - else - raise "Unknown test_order: #{self.test_order.inspect}" - end - end - - ## - # Returns true if the test passed. - - def passed? - @passed - end - - ## - # Runs before every test. Use this to set up before each test - # run. - - def setup; end - - ## - # Runs after every test. Use this to clean up after each test - # run. - - def teardown; end - - include MiniTest::Assertions - end # class TestCase - end # class Unit - - Test = Unit::TestCase -end # module MiniTest - -Minitest = MiniTest # :nodoc: because ugh... I typo this all the time |