| Age | Commit message (Collapse) | Author |
|---|
|
* YJIT: Add --yjit-pause and RubyVM::YJIT.resume
This allows booting YJIT in a suspended state. We chose to add a new
command line option as opposed to simply allowing YJIT.resume to work
without any command line option because it allows for combining with
YJIT tuning command line options. It also simpifies implementation.
Paired with Kokubun and Maxime.
* Update yjit.rb
Co-authored-by: Takashi Kokubun <takashikkbn@gmail.com>
---------
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
Co-authored-by: Takashi Kokubun <takashikkbn@gmail.com>
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
|
|
Notes:
Merged: https://github.com/ruby/ruby/pull/7535
Merged-By: k0kubun <takashikkbn@gmail.com>
|
|
I closed https://github.com/ruby/ruby/pull/7543, but part of the diff
seems useful regardless, so I extracted it.
|
|
Somewhat important because having the lock is a key part of the
soundness reasoning for the `unsafe` usage here.
Notes:
Merged: https://github.com/ruby/ruby/pull/7530
|
|
Notes:
Merged-By: k0kubun <takashikkbn@gmail.com>
|
|
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
|
|
|
|
For example:
```ruby
def my_func(x, y, *rest)
p [x, y, rest]
end
my_func(1, 2, 3, *[4, 5])
```
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
|
|
If the previous instruction is not a leaf instruction, then the PC was
incremented before the instruction was ran (meaning the currently
executing instruction is actually the previous instruction), so we
should not increment the PC otherwise we will calculate the source
line for the next instruction.
This bug can be reproduced in the following script:
```
require "objspace"
ObjectSpace.trace_object_allocations_start
a =
1.0 / 0.0
p [ObjectSpace.allocation_sourceline(a), ObjectSpace.allocation_sourcefile(a)]
```
Which outputs: [4, "test.rb"]
This is incorrect because the object was allocated on line 10 and not
line 4. The behaviour is correct when we use a leaf instruction (e.g.
if we replaced `1.0 / 0.0` with `"hello"`), then the output is:
[10, "test.rb"].
[Bug #19456]
Notes:
Merged: https://github.com/ruby/ruby/pull/7357
|
|
Notes:
Merged-By: k0kubun <takashikkbn@gmail.com>
|
|
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
[Feature #19425]
Notes:
Merged: https://github.com/ruby/ruby/pull/7273
|
|
* YJIT: Handle splat with opt more fully
* Update yjit/src/codegen.rs
---------
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
YJIT: implement codegen for String#empty?
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
Notes:
Merged-By: k0kubun <takashikkbn@gmail.com>
|
|
This dispatches to a c func for doing the dynamic lookup. I experimented with chain on the proc but wasn't able to detect which call sites would be monomorphic vs polymorphic. There is definitely room for optimization here, but it does reduce exits.
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
* YJIT: Support invokeblock
* Update yjit/src/backend/arm64/mod.rs
* Update yjit/src/codegen.rs
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
* YJIT: Add RubyVM::YJIT.code_gc
* Rename compiled_page_count to live_page_count
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
Co-authored-by: John Hawthorn <john@hawthorn.email>
Co-authored-by: John Hawthorn <john@hawthorn.email>
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
when it fails to allocate a new page.
Co-authored-by: Alan Wu <alansi.xingwu@shopify.com>
Notes:
Merged-By: k0kubun <takashikkbn@gmail.com>
|
|
Notes:
Merged-By: k0kubun <takashikkbn@gmail.com>
|
|
* Make mjit_cont sharable with YJIT
* Update dependencies
* Update YJIT binding
Notes:
Merged-By: k0kubun <takashikkbn@gmail.com>
|
|
This allows x86_64 based YJIT to run on Docker Desktop on Apple silicon (arm64)
Mac because it will avoid a subtle behavior difference in `mprotect` system call
between the Linux kernel and `qemu-x86_64` user space emulator.
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
* Implement optimize send in yjit
This successfully makes all our benchmarks exit way less for optimize send reasons.
It makes some benchmarks faster, but not by as much as I'd like. I think this implementation
works, but there are definitely more optimial arrangements. For example, what if we compiled
send to a jump table? That seems like perhaps the most optimal we could do, but not obvious (to me)
how to implement give our current setup.
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
* Attempt at fixing the issues raised by @XrXr
* fix allowlist
* returns 0 instead of nil when not found
* remove comment about encoding exception
* Fix up c changes
* Update assert
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
* get rid of unneeded code and fix the flags
* Apply suggestions from code review
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
* rename and fix typo
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
* YJIT: fix a parameter name
* YJIT: add support for calling bmethods
This commit adds support for the VM_METHOD_TYPE_BMETHOD method type in
YJIT. You can get these type of methods from facilities like
Kernel#define_singleton_method and Module#define_method.
Even though the body of these methods are blocks, the parameter setup
for them is exactly the same as VM_METHOD_TYPE_ISEQ, so we can reuse
the same logic in gen_send_iseq(). You can see this from how
vm_call_bmethod() eventually calls setup_parameters_complex() with
arg_setup_method.
Bmethods do need their frame environment to be setup differently. We
handle this by allowing callers of gen_send_iseq() to control the iseq,
the frame flag, and the prev_ep. The `prev_ep` goes into the same
location as the block handler would go into in an iseq method frame.
Co-authored-by: John Hawthorn <john@hawthorn.email>
Co-authored-by: John Hawthorn <john@hawthorn.email>
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
available (#6380)
YJIT should die if we compile on ARM64 with no icache clear available
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
* Add rb_callable_method_entry_or_negative
* YJIT: Implement specialized respond_to?
This implements a specialized respond_to? in YJIT.
* Update yjit/src/codegen.rs
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
* Initial support for VM_CALL_ARGS_SPLAT
This implements support for calls with splat (*) for some methods. In
benchmarks this made very little difference for most benchmarks, but a
large difference for binarytrees. Looking at side exits, many
benchmarks now don't exit for splat, but exit for some other
reason. Binarytrees however had a number of calls that used splat args
that are now much faster. In my non-scientific benchmarking this made
splat args performance on par with not using splat args at all.
* Fix wording and whitespace
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
* Get rid of side_effect reassignment
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
(https://github.com/Shopify/ruby/pull/442)
Previously we cleared the cache for all the code in the system when we
flip memory protection, which was prohibitively expensive since the
operation is not constant time. Instead, only clear the cache for the
memory region of newly written code when we write out new code.
This brings the runtime for the 30k_if_else test down to about 6 seconds
from the previous 45 seconds on my laptop.
Notes:
Merged: https://github.com/ruby/ruby/pull/6289
|
|
(https://github.com/Shopify/ruby/pull/404)
We have a large extern block in cruby.rs leftover from the port. We can
use bindgen for it now and reserve the manual declaration for just a
handful of vm_insnhelper.c functions.
Fixup a few minor discrepencies bindgen found between the C declaration
and the manual declaration. Mostly missing `const` on the C side.
|
|
|
|
|
|
Notes:
Merged: https://github.com/ruby/ruby/pull/6278
|
|
(#6191)
Teach getblockparamproxy to handle the no-block case without exiting
Co-authored-by: John Hawthorn <john@hawthorn.email>
Co-authored-by: John Hawthorn <john@hawthorn.email>
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
|
|
In a small script the speed of this feature isn't really noticeable but
on Rails it's very noticeable how slow this can be. This PR aims to
speed up two parts of the functionality.
1) The Rust exit recording code
Instead of adding all samples as we see them to the yjit_raw_samples and
yjit_line_samples, we can increment the counter on the ones we've seen
before. This will be faster on traces where we are hitting the same
stack often. In a crude measurement of booting just the active record
base test (`test/cases/base_test.rb`) we found that this improved the
speed by 1 second.
This also results in a smaller marshal dump file which sped up the test
boot time by 4 seconds with trace exits on.
2) The Ruby parsing code
Previously we were allocating new arrays using `shift` and
`each_with_index`. This change avoids allocating new arrays by using an
index. This change saves us the most amount of time, gaining 11 seconds.
Before this change the test boot time took 62 seconds, after it took 47
seconds. This is still too long but it's a step closer to faster
functionality. Next we're going to tackle allowing you to collect trace
exits for a specific instruction. There is also some potential slowness
in the GC code that I'd like to take a second look at.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
Refactor gen_opt_mod in YJIT
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
|
|
This commit makes YJIT allocate memory for generated code gradually as
needed. Previously, YJIT allocates all the memory it needs on boot in
one go, leading to higher than necessary resident set size (RSS) and
time spent on boot initializing the memory with a large memset().
Users should no longer need to search for a magic number to pass to
`--yjit-exec-mem` since physical memory consumption should now more
accurately reflect the requirement of the workload.
YJIT now reserves a range of addresses on boot. This region start out
with no access permission at all so buggy attempts to jump to the region
crashes like before this change. To get this hardening at finer
granularity than the page size, we fill each page with trapping
instructions when we first allocate physical memory for the page.
Most of the time applications don't need 256 MiB of executable code, so
allocating on-demand ends up doing less total work than before. Case in
point, a simple `ruby --yjit-call-threshold=1 -eitself` takes about
half as long after this change. In terms of memory consumption, here is
a table to give a rough summary of the impact:
| Peak RSS in MiB | -eitself example | railsbench once |
| :-------------: | ---------------: | --------------: |
| before | 265 | 377 |
| after | 11 | 143 |
| no YJIT | 10 | 101 |
A new module is introduced to handle allocation bookkeeping.
`CodePtr` is moved into the module since it has a close relationship
with the new `VirtualMemory` struct. This new interface has a slightly
smaller surface than before in that marking a region as writable is no
longer a public operation.
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
Notes:
Merged: https://github.com/ruby/ruby/pull/6007
Merged-By: nobu <nobu@ruby-lang.org>
|
|
`rb_yjit_get_stats` is defined twice in yjit.c, it only needs to be
defined once.
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
When running with `--yjit-stats` turned on, yjit can inform the user
what the most common exits are. While this is useful information it
doesn't tell you the source location of the code that exited or what the
code that exited looks like. This change intends to fix that.
To use the feature, run yjit with the `--yjit-trace-exits` option,
which will record the backtrace for every exit that occurs. This functionality
requires the stats feature to be turned on. Calling `--yjit-trace-exits`
will automatically set the `--yjit-stats` option.
Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will
Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file
based on the passed filename.
*Example usage:*
Given the following script, we write to a file called
`concat_array.dump` the results of `RubyVM::YJIT.exit_locations`.
```ruby
def concat_array
["t", "r", *x = "u", "e"].join
end
1000.times do
concat_array
end
RubyVM::YJIT.dump_exit_locations("concat_array.dump")
```
When we run the file with this branch and the appropriate flags the
stacktrace will be recorded. Note Stackprof needs to be installed or you
need to point to the library directly.
```
./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb
```
We can then read the dump file with Stackprof:
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump
```
Results will look similar to the following:
```
==================================
Mode: ()
Samples: 1817 (0.00% miss rate)
GC: 0 (0.00%)
==================================
TOTAL (pct) SAMPLES (pct) FRAME
1001 (55.1%) 1001 (55.1%) concatarray
335 (18.4%) 335 (18.4%) invokeblock
178 (9.8%) 178 (9.8%) send
140 (7.7%) 140 (7.7%) opt_getinlinecache
...etc...
```
Simply inspecting the `concatarray` method will give `SOURCE
UNAVAILABLE` because the source is insns.def.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray
```
Result:
```
concatarray (nonexistent.def:1)
samples: 1001 self (55.1%) / 1001 total (55.1%)
callers:
1000 ( 99.9%) Object#concat_array
1 ( 0.1%) Gem.suffixes
callees (0 total):
code:
SOURCE UNAVAILABLE
```
However if we go deeper to the callee we can see the exact
source of the `concatarray` exit.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array
```
```
Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1)
samples: 0 self (0.0%) / 1000 total (55.0%)
callers:
1000 ( 100.0%) block in <main>
callees (1000 total):
1000 ( 100.0%) concatarray
code:
| 1 | def concat_array
1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join
| 3 | end
```
The `--walk` option is recommended for this feature as it make it
easier to traverse the tree of exits.
*Goals of this feature:*
This feature is meant to give more information when working on YJIT.
The idea is that if we know what code is exiting we can decide what
areas to prioritize when fixing exits. In some cases this means adding
prioritizing avoiding certain exits in yjit. In more complex cases it
might mean changing the Ruby code to be more performant when run with
yjit. Ultimately the more information we have about what code is exiting
AND why, the better we can make yjit.
*Known limitations:*
* Due to tracing exits, running this on large codebases like Rails
can be quite slow.
* On complex methods it can still be difficult to pinpoint the exact cause of
an exit.
* Stackprof is a requirement to to view the backtrace information from
the dump file.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
For string concat, see if compile-time encoding of strings matches.
If so, use simple buffer string concat at runtime. Otherwise, use
encoding-checking string concat.
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
YJIT can't support these builds so it's better to reject with a message
than to crash at runtime.
Notes:
Merged: https://github.com/ruby/ruby/pull/5873
|
|
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
Notes:
Merged: https://github.com/ruby/ruby/pull/5826
|
