| Age | Commit message (Collapse) | Author |
|---|
|
Notes:
Merged: https://github.com/ruby/ruby/pull/6016
|
|
And re-embed any strings that can now fit inside the slot they've been
moved to
Notes:
Merged: https://github.com/ruby/ruby/pull/5986
|
|
|
|
http://rubyci.s3.amazonaws.com/ubuntu1804/ruby-master/log/20220613T003003Z.log.html.gz
```
/home/chkbuild/chkbuild/tmp/build/20220613T003003Z/ruby/test/ruby/test_yjit_exit_locations.rb:96: warning: assigned but unused variable - out
/home/chkbuild/chkbuild/tmp/build/20220613T003003Z/ruby/test/ruby/test_yjit_exit_locations.rb:96: warning: assigned but unused variable - err
/home/chkbuild/chkbuild/tmp/build/20220613T003003Z/ruby/test/ruby/test_yjit_exit_locations.rb:96: warning: assigned but unused variable - status
```
|
|
Previously, because opt_aref and opt_aset don't push a frame, when they
would call rb_hash to determine the hash value of the key, the initial
level of recursion would incorrectly use the method id at the top of the
stack instead of "hash".
This commit replaces rb_exec_recursive_outer with
rb_exec_recursive_outer_mid, which takes an explicit method id, so that
we can make the hash calculation behave consistently.
rb_exec_recursive_outer was documented as being internal, so I believe
this should be okay to change.
Notes:
Merged: https://github.com/ruby/ruby/pull/6004
|
|
df317151a5b4e0c5a30fcc321a9dc6abad63f7ed removed the code to free
rb_hook_list_t, so repeated targeting of the same bmethod started
to leak the hook list. You can observe how the maximum memory use
scales with input size in the following script with `/usr/bin/time -v`.
```ruby
o = Object.new
o.define_singleton_method(:foo) {}
trace = TracePoint.new(:return) {}
bmethod = o.method(:foo)
ARGV.first.to_i.times { trace.enable(target:bmethod){} }
4.times {GC.start}
```
After this change the maximum doesn't grow as quickly.
To plug the leak, check whether the hook list is already allocated
when enabling the targeting TracePoint for the bmethod. This fix
also allows multiple TracePoints to target the same bmethod, similar
to other valid TracePoint targets.
Finally, free the rb_hook_list_t struct when freeing the method
definition it lives on. Freeing in the GC is a good way to avoid
lifetime problems similar to the one fixed in df31715.
[Bug #18031]
Notes:
Merged: https://github.com/ruby/ruby/pull/4651
|
|
I thought about using it in 2931957d6ff16b5c095f6e8095384c98130133ad
once and then ended up not using it.
|
|
I originally added the check for
RubyVM::YJIT.trace_exit_locations_enabled? to fix errors when these
tests run without the stats feature enabled. However I forgot that this
will never be true when this test is booting, so nothing was running
when the stats feature is turned on.
Instead I've decided to make a new hash in the dump file and check if
exit locations are enabled there. If they aren't enabled we return early
to avoid checking for keys that won't exit in the dumped exit locations.
I chose to add this additional enabled check because empty exit
locations might not indicate that stats isn't enabled, it could mean the
feature is entirely broken. I do want these tests to fail if stats are
on and nothing was collected.
Followup to #5970
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
When running with `--yjit-stats` turned on, yjit can inform the user
what the most common exits are. While this is useful information it
doesn't tell you the source location of the code that exited or what the
code that exited looks like. This change intends to fix that.
To use the feature, run yjit with the `--yjit-trace-exits` option,
which will record the backtrace for every exit that occurs. This functionality
requires the stats feature to be turned on. Calling `--yjit-trace-exits`
will automatically set the `--yjit-stats` option.
Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will
Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file
based on the passed filename.
*Example usage:*
Given the following script, we write to a file called
`concat_array.dump` the results of `RubyVM::YJIT.exit_locations`.
```ruby
def concat_array
["t", "r", *x = "u", "e"].join
end
1000.times do
concat_array
end
RubyVM::YJIT.dump_exit_locations("concat_array.dump")
```
When we run the file with this branch and the appropriate flags the
stacktrace will be recorded. Note Stackprof needs to be installed or you
need to point to the library directly.
```
./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb
```
We can then read the dump file with Stackprof:
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump
```
Results will look similar to the following:
```
==================================
Mode: ()
Samples: 1817 (0.00% miss rate)
GC: 0 (0.00%)
==================================
TOTAL (pct) SAMPLES (pct) FRAME
1001 (55.1%) 1001 (55.1%) concatarray
335 (18.4%) 335 (18.4%) invokeblock
178 (9.8%) 178 (9.8%) send
140 (7.7%) 140 (7.7%) opt_getinlinecache
...etc...
```
Simply inspecting the `concatarray` method will give `SOURCE
UNAVAILABLE` because the source is insns.def.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray
```
Result:
```
concatarray (nonexistent.def:1)
samples: 1001 self (55.1%) / 1001 total (55.1%)
callers:
1000 ( 99.9%) Object#concat_array
1 ( 0.1%) Gem.suffixes
callees (0 total):
code:
SOURCE UNAVAILABLE
```
However if we go deeper to the callee we can see the exact
source of the `concatarray` exit.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array
```
```
Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1)
samples: 0 self (0.0%) / 1000 total (55.0%)
callers:
1000 ( 100.0%) block in <main>
callees (1000 total):
1000 ( 100.0%) concatarray
code:
| 1 | def concat_array
1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join
| 3 | end
```
The `--walk` option is recommended for this feature as it make it
easier to traverse the tree of exits.
*Goals of this feature:*
This feature is meant to give more information when working on YJIT.
The idea is that if we know what code is exiting we can decide what
areas to prioritize when fixing exits. In some cases this means adding
prioritizing avoiding certain exits in yjit. In more complex cases it
might mean changing the Ruby code to be more performant when run with
yjit. Ultimately the more information we have about what code is exiting
AND why, the better we can make yjit.
*Known limitations:*
* Due to tracing exits, running this on large codebases like Rails
can be quite slow.
* On complex methods it can still be difficult to pinpoint the exact cause of
an exit.
* Stackprof is a requirement to to view the backtrace information from
the dump file.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Notes:
Merged-By: maximecb <maximecb@ruby-lang.org>
|
|
Fixes [Bug #18771]
Notes:
Merged: https://github.com/ruby/ruby/pull/5953
|
|
|
|
We could fix it, but removing files in the directory recursively is
tedious in C and --mjit-debug is not a concern for users. We have
TestMJITDebug for detecting linker problems that are ignored by -O. It's
not really for maintaining --mjit-debug itself.
|
|
force_major_gc_count is the number of times the size pool forced major
GC to run.
|
|
`test_thread_instrumentation_fork_safe` has been failing occasionaly
on Ubuntu and Arch. At this stage we're not sure why, all we know is
that the child exit with status 1.
I suspect that something entirely unrelated cause the forked children
to fail on exit, so by using `exit!(0)` and doing assertions in the
parent I hope to be resilient to that.
Notes:
Merged: https://github.com/ruby/ruby/pull/5983
|
|
#message (https://github.com/ruby/error_highlight/pull/24)
See https://bugs.ruby-lang.org/issues/18564.
Ref: https://github.com/ruby/did_you_mean/pull/177
https://github.com/ruby/error_highlight/commit/671b7c61b2
|
|
|
|
This reverts commit 9d927204e7b86eb00bfd07a060a6383139edf741.
Notes:
Merged: https://github.com/ruby/ruby/pull/5981
|
|
... only when the message string has a newline.
`p StandardError.new("foo\nbar")` now prints `#<StandardError: "foo\nbar">'
instead of:
#<StandardError:
bar>
[Bug #18170]
Notes:
Merged: https://github.com/ruby/ruby/pull/4857
|
|
Currently only literal `0` and `1` are accepted as `read`/`write`
flags.
This patch allows other boolean arguments, C macros (`FALSE`/`TRUE`),
Ruby `VALUE`s (`Qfalse`/`Qtrue`), and C99 `bool`s (`false`/`true`), as
well.
https://github.com/ruby/rdoc/commit/169dc02e3c
|
|
Invalid escapes are handled at multiple levels. The first level
is in parse.y, so skip invalid unicode escape checks for regexps
in parse.y.
Make rb_reg_preprocess and unescape_nonascii accept the regexp
options. In unescape_nonascii, if the regexp is an extended
regexp, when "#" is encountered, ignore all characters until the
end of line or end of regexp.
Unfortunately, in extended regexps, you can use "#" as a non-comment
character inside a character class, so also parse "[" and "]"
specially for extended regexps, and only skip comments if "#" is
not inside a character class. Handle nested character classes as well.
This issue doesn't just affect extended regexps, it also affects
"(#?" comments inside all regexps. So for those comments, scan
until trailing ")" and ignore content inside.
I'm not sure if there are other corner cases not handled. A
better fix would be to redesign the regexp parser so that it
unescaped during parsing instead of before parsing, so you already
know the current parsing state.
Fixes [Bug #18294]
Co-authored-by: Nobuyoshi Nakada <nobu@ruby-lang.org>
Notes:
Merged: https://github.com/ruby/ruby/pull/5721
Merged-By: jeremyevans <code@jeremyevans.net>
|
|
If an autoload exists for a constant, but the path for the autoload
was required, const_source_location would return [false, 0] instead
of the actual file and line. This fixes it by setting the appropriate
file and line in rb_const_set, and saving the file and line in
const_tbl_update before they get reset by current_autoload_data.
Fixes [Bug #18624]
Notes:
Merged: https://github.com/ruby/ruby/pull/5646
|
|
Previously `(2..).cover?("2"..)` was false, but
`(..2).cover?(.."2")` was true. This changes it so both are false,
treating beginless ranges the same as endless ranges in regards to
type checks.
This also adds documentation to #cover? to describe behavior with
beginless and endless ranges, testing each documentation example,
which is how this bug was found.
Fixes [Bug #18155]
Notes:
Merged: https://github.com/ruby/ruby/pull/5831
|
|
Implements [Feature #12655]
Co-authored-by: Nobuyoshi Nakada <nobu@ruby-lang.org>
Notes:
Merged: https://github.com/ruby/ruby/pull/5733
Merged-By: jeremyevans <code@jeremyevans.net>
|
|
https://github.com/ruby/rdoc/commit/fec1ab2e41
|
|
https://github.com/ruby/cgi/commit/93326fb622
|
|
The tests fail randomly on some platforms.
http://rubyci.s3.amazonaws.com/ubuntu/ruby-master/log/20220605T213004Z.fail.html.gz
http://rubyci.s3.amazonaws.com/arch/ruby-master/log/20220605T210003Z.fail.html.gz
```
[15737/21701] TestThreadInstrumentation#test_thread_instrumentation_fork_safe/home/chkbuild/chkbuild/tmp/build/20220605T213004Z/ruby/tool/lib/test/unit/assertions.rb:109:in `assert': Expected 0 to be nonzero?. (Test::Unit::AssertionFailedError)
```
The failures seem to depend on context switches. I suspect `sleep 0.05`
is too short, so this change tries to extend the wait time.
|
|
https://github.com/ruby/rdoc/commit/83051403d6
|
|
https://github.com/ruby/rdoc/commit/ce63794fde
|
|
Ref: https://bugs.ruby-lang.org/issues/18339
Design:
- This tries to minimize the overhead when no hook is registered.
It should only incur an extra unsynchronized boolean check.
- The hook list is protected with a read-write lock as to cause
contention when some hooks are registered.
- The hooks MUST be thread safe, and MUST NOT call into Ruby as they
are executed outside the GVL.
- It's simply a noop on Windows.
API:
```
rb_internal_thread_event_hook_t * rb_internal_thread_add_event_hook(rb_internal_thread_event_callback callback, rb_event_flag_t internal_event, void *user_data);
bool rb_internal_thread_remove_event_hook(rb_internal_thread_event_hook_t * hook);
```
You can subscribe to 3 events:
- READY: called right before attempting to acquire the GVL
- RESUMED: called right after successfully acquiring the GVL
- SUSPENDED: called right after releasing the GVL.
The hooks MUST be threadsafe, as they are executed outside of the GVL, they also MUST NOT call any Ruby API.
Notes:
Merged: https://github.com/ruby/ruby/pull/5500
|
|
Define `GC.verify_compaction_references` as a built-in ruby method,
according to GC compaction support via `GC::OPTS`.
Notes:
Merged: https://github.com/ruby/ruby/pull/5972
|
|
|
|
`YAML::PrivateType`
This issue was not detected because when all traces of old YAML parser
and emitter `Syck` were removed, this null-type.gemspec.rz marshalled
gemspec was updated to no longer load `YAML::Syck::PrivateType` but load
`Psych::PrivateType` instead.
However, realworld old marshalled gemspecs still use the
`YAML::PrivateType` constant, so this commit replaces the gemspec to be
the real pry-0.4.7 marshalled gemspec, so that it catches this issue.
https://github.com/rubygems/rubygems/commit/51b330b8d2
|
|
This test is making sure that RubyGems is able to load old marshalled
gemspecs that include a field loading `YAML::PrivateType` instances in
the `rubyforge_project` field instead of `nil` due to a bug in old YAML
emitters.
At some point, the `rubyforge_project` field was removed and this test
was updated to just check another field. However, in the realworld other
fields do not have this issue and the marshalled gemspec we use for
testing still has this issue in the field reserved for the
`rubyforge_project` field. So I think updating the test to check other
field was not correct.
Instead, since the `rubyforge_project` field is now ignored, we no
longer need to worry about any conversion in this field. The only thing
we care about is that the marshal loading still works (which requires
that the constant is at least defined).
So this commit updates the test to make this more clear.
https://github.com/rubygems/rubygems/commit/cddfacf6d4
|
|
|
|
/test/rubygems/test_gem_ext_cargo_builder/custom_name
Bumps [rb-sys](https://github.com/ianks/rb-sys) from v0.7.3 to v0.9.0.
- [Release notes](https://github.com/ianks/rb-sys/releases)
- [Commits](https://github.com/ianks/rb-sys/compare/4a5dd9782075fc6e197976eb2188231a388c3c95...https://github.com/rubygems/rubygems/commit/e4f00b9761af)
---
updated-dependencies:
- dependency-name: rb-sys
dependency-type: direct:production
...
Signed-off-by: dependabot[bot] <support@github.com>
https://github.com/rubygems/rubygems/commit/874bbc96b2
|
|
Bumps [rb-sys](https://github.com/ianks/rb-sys) from v0.7.3 to v0.9.0.
- [Release notes](https://github.com/ianks/rb-sys/releases)
- [Commits](https://github.com/ianks/rb-sys/compare/4a5dd9782075fc6e197976eb2188231a388c3c95...https://github.com/rubygems/rubygems/commit/e4f00b9761af)
---
updated-dependencies:
- dependency-name: rb-sys
dependency-type: direct:production
...
Signed-off-by: dependabot[bot] <support@github.com>
https://github.com/rubygems/rubygems/commit/eb31b14a37
|
|
`vm_trace_hook()` runs global hooks before running local hooks.
Previously, we read the local hook list before running the global hooks
which led to use-after-free when a global hook frees the local hook
list. A global hook can do this by disabling a local TracePoint, for
example.
Delay local hook list loading until after running the global hooks.
Issue discovered by Jeremy Evans in GH-5862.
[Bug #18730]
Notes:
Merged: https://github.com/ruby/ruby/pull/5865
|
|
|
|
Fix https://github.com/ruby/stringio/pull/16
https://github.com/ruby/stringio/commit/c8a69e80d2
|
|
|
|
Try to mirror IO behavior, where chomp takes out the entire paragraph
separators between entries, but does not chomp a single line separator
at the end of the string.
Partially Fixes [Bug #18768]
https://github.com/ruby/stringio/commit/a83ddbb7f0
|
|
nil separator means no separator at all, so nothing should be
chomped.
Partial fix for Ruby [Bug #18770]
https://github.com/ruby/stringio/commit/feaa2ec631
|
|
Previously, this could result in an infinite loop. Always update
the e pointer in this case, setting w when chomping so the chomped
data is not included in the output.
Fixes [Bug #18769]
https://github.com/ruby/stringio/commit/4bf64d5130
|
|
https://github.com/ruby/stringio/commit/a35268a3ac
|
|
|
|
configured
https://github.com/rubygems/rubygems/commit/9f3b21192d
|
|
Notes:
Merged: https://github.com/ruby/ruby/pull/5941
|
|
Notes:
Merged: https://github.com/ruby/ruby/pull/5926
|
|
Fixes [Bug #18779]
Define the following methods as `rb_f_notimplement` on unsupported
platforms:
- GC.compact
- GC.auto_compact
- GC.auto_compact=
- GC.latest_compact_info
- GC.verify_compaction_references
This change allows users to call `GC.respond_to?(:compact)` to
properly test for compaction support. Previously, it was necessary to
invoke `GC.compact` or `GC.verify_compaction_references` and check if
those methods raised `NotImplementedError` to determine if compaction
was supported.
This follows the precedent set for other platform-specific
methods. For example, in `process.c` for methods such as
`Process.fork`, `Process.setpgid`, and `Process.getpriority`.
Notes:
Merged: https://github.com/ruby/ruby/pull/5934
|
|
Exception#detailed_message
I am asking did_you_mean to use Exception#detailed_message to add
"Did you mean?" suggestion instead of overriding #message method.
https://github.com/ruby/did_you_mean/pull/177
Unfortunately, the change will affect Gem::UnknownCommandError, which
excepts did_you_mean to override #message method.
This PR absorbs the change of did_you_mean.
Gem::CommandManager now calls #detailed_message method to get a message
string with "Did you mean?" suggestion from an exception.
https://github.com/rubygems/rubygems/commit/8f104228d3
|
