| Age | Commit message (Collapse) | Author |
|---|
|
Notes:
Merged: https://github.com/ruby/ruby/pull/6767
|
|
Notes:
Merged: https://github.com/ruby/ruby/pull/6767
|
|
Notes:
Merged: https://github.com/ruby/ruby/pull/6767
|
|
|
|
The ractor_belonging_id has been moved out of the headers, so object
shapes can take the top 32 bits of the flags on debug builds.
Notes:
Merged: https://github.com/ruby/ruby/pull/6763
|
|
This commit changes the shape id comparisons to use a 32 bit comparison
rather than 64 bit. That means we don't need to load the shape id to a
register on x86 machines.
Given the following program:
```ruby
class Foo
def initialize
@foo = 1
@bar = 1
end
def read
[@foo, @bar]
end
end
foo = Foo.new
foo.read
foo.read
foo.read
foo.read
foo.read
puts RubyVM::YJIT.disasm(Foo.instance_method(:read))
```
The machine code we generated _before_ this change is like this:
```
== BLOCK 1/4, ISEQ RANGE [0,3), 65 bytes ======================
# getinstancevariable
0x559a18623023: mov rax, qword ptr [r13 + 0x18]
# guard object is heap
0x559a18623027: test al, 7
0x559a1862302a: jne 0x559a1862502d
0x559a18623030: cmp rax, 4
0x559a18623034: jbe 0x559a1862502d
# guard shape, embedded, and T_OBJECT
0x559a1862303a: mov rcx, qword ptr [rax]
0x559a1862303d: movabs r11, 0xffff00000000201f
0x559a18623047: and rcx, r11
0x559a1862304a: movabs r11, 0xb000000002001
0x559a18623054: cmp rcx, r11
0x559a18623057: jne 0x559a18625046
0x559a1862305d: mov rax, qword ptr [rax + 0x18]
0x559a18623061: mov qword ptr [rbx], rax
== BLOCK 2/4, ISEQ RANGE [3,6), 0 bytes =======================
== BLOCK 3/4, ISEQ RANGE [3,6), 47 bytes ======================
# gen_direct_jmp: fallthrough
# getinstancevariable
# regenerate_branch
# getinstancevariable
# regenerate_branch
0x559a18623064: mov rax, qword ptr [r13 + 0x18]
# guard shape, embedded, and T_OBJECT
0x559a18623068: mov rcx, qword ptr [rax]
0x559a1862306b: movabs r11, 0xffff00000000201f
0x559a18623075: and rcx, r11
0x559a18623078: movabs r11, 0xb000000002001
0x559a18623082: cmp rcx, r11
0x559a18623085: jne 0x559a18625099
0x559a1862308b: mov rax, qword ptr [rax + 0x20]
0x559a1862308f: mov qword ptr [rbx + 8], rax
```
After this change, it's like this:
```
== BLOCK 1/4, ISEQ RANGE [0,3), 41 bytes ======================
# getinstancevariable
0x5560c986d023: mov rax, qword ptr [r13 + 0x18]
# guard object is heap
0x5560c986d027: test al, 7
0x5560c986d02a: jne 0x5560c986f02d
0x5560c986d030: cmp rax, 4
0x5560c986d034: jbe 0x5560c986f02d
# guard shape
0x5560c986d03a: cmp word ptr [rax + 6], 0x19
0x5560c986d03f: jne 0x5560c986f046
0x5560c986d045: mov rax, qword ptr [rax + 0x10]
0x5560c986d049: mov qword ptr [rbx], rax
== BLOCK 2/4, ISEQ RANGE [3,6), 0 bytes =======================
== BLOCK 3/4, ISEQ RANGE [3,6), 23 bytes ======================
# gen_direct_jmp: fallthrough
# getinstancevariable
# regenerate_branch
# getinstancevariable
# regenerate_branch
0x5560c986d04c: mov rax, qword ptr [r13 + 0x18]
# guard shape
0x5560c986d050: cmp word ptr [rax + 6], 0x19
0x5560c986d055: jne 0x5560c986f099
0x5560c986d05b: mov rax, qword ptr [rax + 0x18]
0x5560c986d05f: mov qword ptr [rbx + 8], rax
```
The first ivar read is a bit more complex, but the second ivar read is
much simpler. I think eventually we could teach the context about the
shape, then emit only one shape guard.
Notes:
Merged: https://github.com/ruby/ruby/pull/6737
|
|
Notes:
Merged: https://github.com/ruby/ruby/pull/6737
|
|
We would like to differentiate types of objects via their shape. This
commit adds a special T_OBJECT shape when we allocate an instance of
T_OBJECT. This allows us to avoid testing whether an object is an
instance of a T_OBJECT or not, we can just check the shape.
Notes:
Merged: https://github.com/ruby/ruby/pull/6758
|
|
Notes:
Merged: https://github.com/ruby/ruby/pull/6717
|
|
Extract an `rb_shape_get_parent` method instead of continually calling
`rb_shape_get_shape_by_id(shape->parent_id)`
Notes:
Merged: https://github.com/ruby/ruby/pull/6708
|
|
This commit adds a `capacity` field to shapes, and adds shape
transitions whenever an object's capacity changes. Objects which are
allocated out of a bigger size pool will also make a transition from the
root shape to the shape with the correct capacity for their size pool
when they are allocated.
This commit will allow us to remove numiv from objects completely, and
will also mean we can guarantee that if two objects share shapes, their
IVs are in the same positions (an embedded and extended object cannot
share shapes). This will enable us to implement ivar sets in YJIT using
object shapes.
Co-Authored-By: Aaron Patterson <tenderlove@ruby-lang.org>
Notes:
Merged: https://github.com/ruby/ruby/pull/6699
|
|
* Avoid RCLASS_IV_TBL in marshal.c
* Avoid RCLASS_IV_TBL for class names
* Avoid RCLASS_IV_TBL for autoload
* Avoid RCLASS_IV_TBL for class variables
* Avoid copying RCLASS_IV_TBL onto ICLASSes
* Use object shapes for Class and Module IVs
Notes:
Merged-By: jhawthorn <john@hawthorn.email>
|
|
`iv_count` is a misleading name because when IVs are unset, the new
shape doesn't decrement this value. `next_iv_count` is an accurate, and
more descriptive name.
Notes:
Merged: https://github.com/ruby/ruby/pull/6608
|
|
Shapes provides us with an (almost) exact count of instance variables.
We only need to check for Qundef when an IV has been "undefined"
Prefer to use ROBJECT_IV_COUNT when iterating IVs
Notes:
Merged: https://github.com/ruby/ruby/pull/6555
|
|
Prior to this commit, we were reading and writing ivar index and
shape ID in inline caches in two separate instructions when
getting and setting ivars. This meant there was a race condition
with ractors and these caches where one ractor could change
a value in the cache while another was still reading from it.
This commit instead reads and writes shape ID and ivar index to
inline caches atomically so there is no longer a race condition.
Co-Authored-By: Aaron Patterson <tenderlove@ruby-lang.org>
Co-Authored-By: John Hawthorn <john@hawthorn.email>
|
|
This reverts commit 9a6803c90b817f70389cae10d60b50ad752da48f.
|
|
This reverts commit 68bc9e2e97d12f80df0d113e284864e225f771c2.
|
|
Object Shapes is used for accessing instance variables and representing the
"frozenness" of objects. Object instances have a "shape" and the shape
represents some attributes of the object (currently which instance variables are
set and the "frozenness"). Shapes form a tree data structure, and when a new
instance variable is set on an object, that object "transitions" to a new shape
in the shape tree. Each shape has an ID that is used for caching. The shape
structure is independent of class, so objects of different types can have the
same shape.
For example:
```ruby
class Foo
def initialize
# Starts with shape id 0
@a = 1 # transitions to shape id 1
@b = 1 # transitions to shape id 2
end
end
class Bar
def initialize
# Starts with shape id 0
@a = 1 # transitions to shape id 1
@b = 1 # transitions to shape id 2
end
end
foo = Foo.new # `foo` has shape id 2
bar = Bar.new # `bar` has shape id 2
```
Both `foo` and `bar` instances have the same shape because they both set
instance variables of the same name in the same order.
This technique can help to improve inline cache hits as well as generate more
efficient machine code in JIT compilers.
This commit also adds some methods for debugging shapes on objects. See
`RubyVM::Shape` for more details.
For more context on Object Shapes, see [Feature: #18776]
Co-Authored-By: Aaron Patterson <tenderlove@ruby-lang.org>
Co-Authored-By: Eileen M. Uchitelle <eileencodes@gmail.com>
Co-Authored-By: John Hawthorn <john@hawthorn.email>
|
|
Revert "* expand tabs. [ci skip]"
This reverts commit 830b5b5c351c5c6efa5ad461ae4ec5085e5f0275.
Revert "This commit implements the Object Shapes technique in CRuby."
This reverts commit 9ddfd2ca004d1952be79cf1b84c52c79a55978f4.
|
|
Object Shapes is used for accessing instance variables and representing the
"frozenness" of objects. Object instances have a "shape" and the shape
represents some attributes of the object (currently which instance variables are
set and the "frozenness"). Shapes form a tree data structure, and when a new
instance variable is set on an object, that object "transitions" to a new shape
in the shape tree. Each shape has an ID that is used for caching. The shape
structure is independent of class, so objects of different types can have the
same shape.
For example:
```ruby
class Foo
def initialize
# Starts with shape id 0
@a = 1 # transitions to shape id 1
@b = 1 # transitions to shape id 2
end
end
class Bar
def initialize
# Starts with shape id 0
@a = 1 # transitions to shape id 1
@b = 1 # transitions to shape id 2
end
end
foo = Foo.new # `foo` has shape id 2
bar = Bar.new # `bar` has shape id 2
```
Both `foo` and `bar` instances have the same shape because they both set
instance variables of the same name in the same order.
This technique can help to improve inline cache hits as well as generate more
efficient machine code in JIT compilers.
This commit also adds some methods for debugging shapes on objects. See
`RubyVM::Shape` for more details.
For more context on Object Shapes, see [Feature: #18776]
Co-Authored-By: Aaron Patterson <tenderlove@ruby-lang.org>
Co-Authored-By: Eileen M. Uchitelle <eileencodes@gmail.com>
Co-Authored-By: John Hawthorn <john@hawthorn.email>
Notes:
Merged: https://github.com/ruby/ruby/pull/6386
|
