= Pattern matching

Pattern matching is a feature allowing deep matching of structured values: checking the structure and binding the matched parts to local variables.

Pattern matching in Ruby is implemented with the +case+/+in+ expression:

    case <expression>
    in <pattern1>
      ...
    in <pattern2>
      ...
    in <pattern3>
      ...
    else
      ...
    end

(Note that +in+ and +when+ branches can *not* be mixed in one +case+ expression.)

or with the +=>+ operator and the +in+ operator, which can be used in a standalone expression:

    <expression> => <pattern>

    <expression> in <pattern>

Pattern matching is _exhaustive_: if variable doesn't match pattern (in a separate +in+ clause), or doesn't matches any branch of +case+ expression (and +else+ branch is absent), +NoMatchingPatternError+ is raised.

Therefore, +case+ expression might be used for conditional matching and unpacking:

  config = {db: {user: 'admin', password: 'abc123'}}

  case config
  in db: {user:} # matches subhash and puts matched value in variable user
    puts "Connect with user '#{user}'"
  in connection: {username: }
    puts "Connect with user '#{username}'"
  else
    puts "Unrecognized structure of config"
  end
  # Prints: "Connect with user 'admin'"

whilst the +=>+ operator is most useful when expected data structure is known beforehand, to just unpack parts of it:

  config = {db: {user: 'admin', password: 'abc123'}}

  config => {db: {user:}} # will raise if the config's structure is unexpected

  puts "Connect with user '#{user}'"
  # Prints: "Connect with user 'admin'"

+<expression> in <pattern>+ is the same as +case <expression>; in <pattern>; true; else false; end+.
You can use it when you only want to know if a pattern has been matched or not:

  users = [{name: "Alice", age: 12}, {name: "Bob", age: 23}]
  users.any? {|u| u in {name: /B/, age: 20..} } #=> true

See below for more examples and explanations of the syntax.

== Patterns

Patterns can be:

* any Ruby object (matched by <code>===</code> operator, like in +when+); (_Value pattern_)
* array pattern: <code>[<subpattern>, <subpattern>, <subpattern>, ...]</code>; (_Array pattern_)
* find pattern: <code>[*variable, <subpattern>, <subpattern>, <subpattern>, ..., *variable]</code>; (_Find pattern_)
* hash pattern: <code>{key: <subpattern>, key: <subpattern>, ...}</code>; (_Hash pattern_)
* combination of patterns with <code>|</code>; (_Alternative pattern_)
* variable capture: <code>variable</code> or <code><pattern> => variable</code>; (_Variable pattern_, _As pattern_)

Any pattern can be nested inside array/find/hash patterns where <code><subpattern></code> is specified.

Array patterns and find patterns match arrays, or objects that respond to +deconstruct+ (see below about the latter).
Hash patterns match hashes, or objects that respond to +deconstruct_keys+ (see below about the latter). Note that only symbol keys are supported for hash patterns, at least for now.

An important difference between array and hash patterns behavior is arrays match only a _whole_ array

  case [1, 2, 3]
  in [Integer, Integer]
    "matched"
  else
    "not matched"
  end
  #=> "not matched"

while the hash matches even if there are other keys besides specified part:

  case {a: 1, b: 2, c: 3}
  in {a: Integer}
    "matched"
  else
    "not matched"
  end
  #=> "matched"

There is also a way to specify there should be no other keys in the matched hash except those explicitly specified by pattern, with <code>**nil</code>:

  case {a: 1, b: 2}
  in {a: Integer, **nil} # this will not match the pattern having keys other than a:
    "matched a part"
  in {a: Integer, b: Integer, **nil}
    "matched a whole"
  else
    "not matched"
  end
  #=> "matched a whole"

Both array and hash patterns support "rest" specification:

  case [1, 2, 3]
  in [Integer, *]
    "matched"
  else
    "not matched"
  end
  #=> "matched"

  case {a: 1, b: 2, c: 3}
  in {a: Integer, **}
    "matched"
  else
    "not matched"
  end
  #=> "matched"

In +case+ (but not in +=>+ and +in+) expression, parentheses around both kinds of patterns could be omitted

  case [1, 2]
  in Integer, Integer
    "matched"
  else
    "not matched"
  end
  #=> "matched"

  case {a: 1, b: 2, c: 3}
  in a: Integer
    "matched"
  else
    "not matched"
  end
  #=> "matched"

Find pattern is similar to array pattern but it can be used to check if the given object has any elements that match the pattern.

  case ["a", 1, "b", "c", 2]
  in [*, String, String, *]
    "matched"
  else
    "not matched"
  end

== Variable binding

Besides deep structural checks, one of the very important features of the pattern matching is the binding of the matched parts to local variables. The basic form of binding is just specifying <code>=> variable_name</code> after the matched (sub)pattern (one might find this similar to storing exceptions in local variables in <code>rescue ExceptionClass => var</code> clause):

  case [1, 2]
  in Integer => a, Integer
    "matched: #{a}"
  else
    "not matched"
  end
  #=> "matched: 1"

  case {a: 1, b: 2, c: 3}
  in a: Integer => m
    "matched: #{m}"
  else
    "not matched"
  end
  #=> "matched: 1"

If no additional check is required, only binding some part of the data to a variable, a simpler form could be used:

  case [1, 2]
  in a, Integer
    "matched: #{a}"
  else
    "not matched"
  end
  #=> "matched: 1"

  case {a: 1, b: 2, c: 3}
  in a: m
    "matched: #{m}"
  else
    "not matched"
  end
  #=> "matched: 1"

For hash patterns, even a simpler form exists: key-only specification (without any value) binds the local variable with the key's name, too:

  case {a: 1, b: 2, c: 3}
  in a:
    "matched: #{a}"
  else
    "not matched"
  end
  #=> "matched: 1"

Binding works for nested patterns as well:

  case {name: 'John', friends: [{name: 'Jane'}, {name: 'Rajesh'}]}
  in name:, friends: [{name: first_friend}, *]
    "matched: #{first_friend}"
  else
    "not matched"
  end
  #=> "matched: Jane"

The "rest" part of a pattern also can be bound to a variable:

  case [1, 2, 3]
  in a, *rest
    "matched: #{a}, #{rest}"
  else
    "not matched"
  end
  #=> "matched: 1, [2, 3]"

  case {a: 1, b: 2, c: 3}
  in a:, **rest
    "matched: #{a}, #{rest}"
  else
    "not matched"
  end
  #=> "matched: 1, {:b=>2, :c=>3}"

Binding to variables currently does NOT work for alternative patterns joined with <code>|</code>:

  case {a: 1, b: 2}
  in {a: } | Array
    "matched: #{a}"
  else
    "not matched"
  end
  # SyntaxError (illegal variable in alternative pattern (a))

<code>_</code> is the only exclusion from this rule: it still binds the first match to local variable <code>_</code>, but allowed to be used in alternative patterns:

  case {a: 1, b: 2}
  in {a: _} | Array
    "matched: #{_}"
  else
    "not matched"
  end
  # => "matched: 1"

It is, though, not advised to reuse bound value, as <code>_</code> pattern's goal is to signify discarded value.

== Variable pinning

Due to variable binding feature, existing local variable can't be straightforwardly used as a sub-pattern:

  expectation = 18

  case [1, 2]
  in expectation, *rest
    "matched. expectation was: #{expectation}"
  else
    "not matched. expectation was: #{expectation}"
  end
  # expected: "not matched. expectation was: 18"
  # real: "matched. expectation was: 1" -- local variable just rewritten

For this case, the pin operator <code>^</code> can be used, to tell Ruby "just use this value as a part of pattern"

  expectation = 18
  case [1, 2]
  in ^expectation, *rest
    "matched. expectation was: #{expectation}"
  else
    "not matched. expectation was: #{expectation}"
  end
  #=> "not matched. expectation was: 18"

One important usage of variable pinning is specifying the same value should happen in the pattern several times:

  jane = {school: 'high', schools: [{id: 1, level: 'middle'}, {id: 2, level: 'high'}]}
  john = {school: 'high', schools: [{id: 1, level: 'middle'}]}

  case jane
  in school:, schools: [*, {id:, level: ^school}] # select the last school, level should match
    "matched. school: #{id}"
  else
    "not matched"
  end
  #=> "matched. school: 2"

  case john # the specified school level is "high", but last school does not match
  in school:, schools: [*, {id:, level: ^school}]
    "matched. school: #{id}"
  else
    "not matched"
  end
  #=> "not matched"

== Matching non-primitive objects: +deconstruct_keys+ and +deconstruct+

As already mentioned above, hash and array/find patterns besides literal arrays and hashes will try to match any object implementing +deconstruct+ (for array/find patterns) or +deconstruct_keys+ (for hash patterns).

  class Point
    def initialize(x, y)
      @x, @y = x, y
    end

    def deconstruct
      puts "deconstruct called"
      [@x, @y]
    end

    def deconstruct_keys(keys)
      puts "deconstruct_keys called with #{keys.inspect}"
      {x: @x, y: @y}
    end
  end

  case Point.new(1, -2)
  in px, Integer  # subpatterns and variable binding works
    "matched: #{px}"
  else
    "not matched"
  end
  # prints "deconstruct called"
  "matched: 1"

  case Point.new(1, -2)
  in x: 0.. => px
    "matched: #{px}"
  else
    "not matched"
  end
  # prints: deconstruct_keys called with [:x]
  #=> "matched: 1"

+keys+ are passed to +deconstruct_keys+ to provide a room for optimization in the matched class: if calculating a full hash representation is expensive, one may calculate only the necessary subhash. When the <code>**rest</code> pattern is used, +nil+ is passed as a +keys+ value:

  case Point.new(1, -2)
  in x: 0.. => px, **rest
    "matched: #{px}"
  else
    "not matched"
  end
  # prints: deconstruct_keys called with nil
  #=> "matched: 1"

Additionally, when matching custom classes, expected class could be specified as a part of the pattern and is checked with <code>===</code>

  class SuperPoint < Point
  end

  case Point.new(1, -2)
  in SuperPoint(x: 0.. => px)
    "matched: #{px}"
  else
    "not matched"
  end
  #=> "not matched"

  case SuperPoint.new(1, -2)
  in SuperPoint[x: 0.. => px] # [] or () parentheses are allowed
    "matched: #{px}"
  else
    "not matched"
  end
  #=> "matched: 1"

== Guard clauses

+if+ can be used to attach an additional condition (guard clause) when the pattern matches. This condition may use bound variables:

  case [1, 2]
  in a, b if b == a*2
    "matched"
  else
    "not matched"
  end
  #=> "matched"

  case [1, 1]
  in a, b if b == a*2
    "matched"
  else
    "not matched"
  end
  #=> "not matched"

+unless+ works, too:

  case [1, 1]
  in a, b unless b == a*2
    "matched"
  else
    "not matched"
  end
  #=> "matched"

== Current feature status

As of Ruby 3.0, one-line pattern matching and find pattern are considered _experimental_: its syntax can change in the future. Every time you use these features in code, the warning will be printed:

  [0] => [*, 0, *]
  # warning: Find pattern is experimental, and the behavior may change in future versions of Ruby!
  # warning: One-line pattern matching is experimental, and the behavior may change in future versions of Ruby!

To suppress this warning, one may use Warning::[]= method:

  Warning[:experimental] = false
  eval('[0] => [*, 0, *]')
  # ...no warning printed...

Note that pattern-matching warning is raised at a compile time, so this will not suppress warning:

  Warning[:experimental] = false # At the time this line is evaluated, the parsing happened and warning emitted
  [0] => [*, 0, *]

So, only subsequently loaded files or `eval`-ed code is affected by switching the flag.

Alternatively, command-line key <code>-W:no-experimental</code> can be used to turn off "experimental" feature warnings.

== Appendix A. Pattern syntax
Approximate syntax is:

  pattern: value_pattern
         | variable_pattern
         | alternative_pattern
         | as_pattern
         | array_pattern
         | find_pattern
         | hash_pattern

  value_pattern: literal
               | Constant
               | ^variable

  variable_pattern: variable

  alternative_pattern: pattern | pattern | ...

  as_pattern: pattern => variable

  array_pattern: [pattern, ..., *variable]
               | Constant(pattern, ..., *variable)
               | Constant[pattern, ..., *variable]

  find_pattern: [*variable, pattern, ..., *variable]
               | Constant(*variable, pattern, ..., *variable)
               | Constant[*variable, pattern, ..., *variable]

  hash_pattern: {key: pattern, key:, ..., **variable}
              | Constant(key: pattern, key:, ..., **variable)
              | Constant[key: pattern, key:, ..., **variable]

== Appendix B. Some undefined behavior examples

To leave room for optimization in the future, the specification contains some undefined behavior.

Use of a variable in an unmatched pattern:

  case [0, 1]
  in [a, 2]
    "not matched"
  in b
    "matched"
  in c
    "not matched"
  end
  a #=> undefined
  c #=> undefined

Number of +deconstruct+, +deconstruct_keys+ method calls:

  $i = 0
  ary = [0]
  def ary.deconstruct
    $i += 1
    self
  end
  case ary
  in [0, 1]
    "not matched"
  in [0]
    "matched"
  end
  $i #=> undefined